151. Bhatti M. Y., Lee, S.-G., and Han, J.-H., "Dynamic Stability and Flight Control of Biomimetic Flapping-Wing Micro Air Vehicle," Aerospace, Vol. 8, No. 12, p. 362, Dec. 2021.

150. Yun J.-M. and Han, J.-H., "Application of Ground Flutter Emulation Test Technique for the Passive Flutter Suppression Effect Validation," International Journal of Aeronautical and Space Sciences, Vol. 22, No. 6, pp. 1344-1355, Dec. 2021.

149. Le, V. D. T., Nguyen, A. T., Nguyen, N. T., Dang, N. D., Tran, N. D., and Han, J. -H., "Effectiveness Analysis of Spin Motion in Reducing Dispersion of Sounding Rocket Flight due to Thrust Misalignment," International Journal of Aeronautical and Space Sciences, Vol. 22, No. 5, pp. 1194-1208, Oct. 2021.

148. Park, K.-Y., Sung, Y.-H., and Han, J.-H., “Cable Suspension and Balance System with Low Support Interference and Vibration for Effective Wind Tunnel Tests,” International Journal of Aeronautical and Space Sciences, Vo. 22, No. 5, pp. 1048-1061, Oct. 2021.

147. Yang, H.-H., and Han, J.-H., “Design and prototyping of rotational bi-stable mechanism using permanent magnets,” Journal of Mechanisms and Robotics, Vol. 13, No. 5, 051004, Oct. 2021.

146. Park, J., Sung, Y.-H., On, S.-Y., Kwon, O -H., Bang, H, Kim S.-S., Han J.-H., Lee J.-R., " Development of wireless SHM sensor node for in-flight real-time monitoring using embedded CNT fiber sensors," Smart Structures and Systems, Vol. 28, No. 3, pp. 333-341, 2021.

145. Odi, P., G., Hwang, D.-H., and Han, J.-H., “Effective elastic, thermoelastic, and piezoelectric properties of braided composites using equivalent laminate modeling,” Advanced Composite Materials, Vol. 30, No. 4, pp.338-364, July 2021.

144. Addo-Akoto, R., Han, J.-S., and Han, J.-H., “Roles of wing flexibility and kinematics in flapping wing aerodynamics,” Journal of Fluids and Structures, Vol. 104, 103317, July 2021.

143. Choi, A. J., Yang, H.-H., and Han, J.-H., “Study on robust aerial docking mechanism with deep learning based drogue detection and docking,” Mechanical Systems and Signal Processing, Vol. 154, 107579, June 2021.

142. Kim, T.-H., Suh, J.-E., and Han, J.-H., “Deployable truss structure with flat-form storability using scissor-like elements, Mechanism and Machine Theory, Vol. 159, 104252, May 2021.

141. Dhital, K., and Han, J.-H., “Ground Effect on Flutter and Limit Cycle Oscillation of Airfoil with Flap,” Journal of Aircraft, Vol. 58, No. 3, pp.688-692, May 2021.

140. Suh, J.-E., Kim, T.-H., and Han, J.-H., “New Approach to Folding a Thin-Walled Yoshimura Patterned Cylinder,” Journal of Spacecraft and Rockets, Vol. 58, No. 2, pp.516-530, March 2021.

139. Hwang, D.-H., Han, J.-H., Lee, J., Lee, Y., and Kim, D, “Performance Optimization of a Split-Type Low-Shock Separation Bolt, Journal of Spacecraft and Rockets, Vol. 58, No. 1, pp. 232-239, Jan. 2021.

138. Park, K.-Y., Sung, Y.-H., and Han, J.-H., “Development of a cable suspension and balance system and its novel calibration methods for effective wind tunnel tests,” Measurement, Vol. 170, 108717, Jan. 2021.

137. Addo-Akoto, R., Han, J.-S., and Han, J.-H., “Aerodynamic performance of flexible flapping wings deformed by slack angle,” Bioinspiration & Biomimetics, Vol. 15, No. 6, pp. 0066005, Oct. 2020.

136. Yun, J.-M. and Han, J.-H., “Development of ground vibration test based flutter emulation technique,” The Aeronautical Journal, Vol. 124, Issue 1279, pp. 1436-1461, Sep. 2020.

135. Park, H.-S., Hwang, D.-H., and Han, J.-H., “Development of shock-absorbing insert for honeycomb sandwich panel,”  Aerospace Science and Technology, Vol. 104,  Article N0. 105930, Sep. 2020.

134. Hwang, D.-H, Park, H.-S., and Han, J.-H., “Development of a miniature point source pyroshock,” Journal of Sound and Vibration, Vol. 481, 115438, Sep. 2020.

133. Hwang, D.-H, Han, D.-H., Han, J.-H., Sung, H.-G., and Ryu, B.-T., “Separation Behavior of Pyrotechnically Actuated Device,” Journal of Spacecraft and Rockets, Apr. 2020.

132. Nguyen, A. T., Han, J.-H. and Vu. T. T., “The Efects of Wing Mass Asymmetry on Low‑Speed Flight Characteristics of an Insect Model,” International Journal of Aeronautical and Space Sciences, Vol. 20, No. 4, pp.940-952, Dec. 2019.

131. Hwang, D.-H, Han, J.-H., Lee, J., Lee, Y, and Kim, D., “A mathematical model for the separation behavior of a split type low-shock separation bolt ,” Acta Astronautica, Vol. 164,  pp. 393-406, Nov.2019.

130. Han, J.-S. and Han, J.-H., “A contralateral wing stabilizes a hovering hawkmoth under a lateral gust,” Scientific Reports, Vol. 9, pp. 393-406, Oct. 2019.

129.  Addo-Akoto, R., Han, J.-S. and Han, J.-H., “Infuence of aspect ratio on wing–wake interaction for fapping wing in hover,” Experiments in Fluids, Vol. 60, No. 11, Article ID 164, Oct. 2019.

128. Nguyen, A. T., Tran, N.D., Vu. T. T., Pham. T. D., Vu. Q. T. and Han, J.-H., “A Neural-network-based Approach to Study the Energy-optimal Hovering Wing Kinematics of a Bionic Hawkmoth Model,” Journal of Bionic Engineering, Vol. 16, No. 5, pp. 904-915, Sep. 2019.

127. Han, J.-S.,Nguyen, A. T. and Han, J.-H., “Aerodynamic characteristics of  flapping wings under steady lateral inflow,” Journal of Fluid Mechanics, Vol. 870, pp. 735-759, Jul. 2019.

126. Han, J.-S., Kim, H.-Y. and Han, J.-H., “Interactions of the wakes of two flapping wings in hover,” Physics of Fluids, Vol. 30, Issue 2, Article ID 021901, Feb. 2019.

125. Addo-Akoto, R. and Han, J.-H., “Bidirectional actuation of buckled bistable beam using twisted string actuator,” Journal of Intelligent Material Systems and Structures, Vol. 30, No. 4, pp. 506-516, Mar. 2019.

124. Kim, H.-Y., Han, J.-S. and Han, J.-H., “Aerodynamic effects of deviating motion of flapping wings in hovering flight,” Bioinspiration & Biomimetics, Vol. 14, No. 2, Article ID 026006, Feb. 2019.

123. Suh, J.-E., Jeong, S.-Y. and Han, J.-H., “A two-dimensional modular deployable truss structure with bistability,” Journal of Intelligent Material Systems and Structures, Vol. 30, No. 3, pp. 335-350, Feb. 2019.

122. Kim, H.-H., Kim, H.-Y., Han, J.-S. and Han, J.-H., “A Development and Assessment of Variable-Incidence Angle Vortex Generator at Low Reynolds Number of ~ 5×10^4,” International Journal of Aeronautical and Space Sciences, Vol. 19, No. 4, pp. 836-842, Dec. 2018.

121. Choi, A. J. and Han, J.-H., “Frequency-based damage detection in cantilever beam using vision-based monitoring system with motion magnification technique,” Journal of Intelligent Material Systems and Structures, Vol. 29, No. 20, pp.3923-3936, Dec. 2018.

120. Lee, S.-J., Hwang, D.-H., and Han, J.-H., “Development of Pyroshock Simulator for Shock Propagation Test,” Shock and Vibration, Vol. 2018, pp.1-13, Sep. 2018.

119. Nguyen, A. T., and Han, J.-H., “Wing flexibility effects on the flight performance of an insect-like flapping-wing micro-air vehicle,” Aerospace Science and Technology, Vol. 79, pp. 468-481, Aug. 2018.

118. Lee, J., Hwang, D.-H., and Han, J.-H., “Study on pyroshock propagation through plates with joints and washers,” Aerospace Science and Technology, Vol. 79, pp. 441-458, Aug. 2018.

117. Hwang, D.-H, Lee, J., Han, J.-H., YeungJo Lee, and Dongjin Kim, “Mathematical Model for the Separation Behavior of Low-Shock Separation Bolts,” Journal of Spacecraft and Rockets, Vol. 55, No. 5, pp. 1208-1221, 2018.

116. Dhital, K., Han, J.-H., “Panel Flutter Emulation Using a Few Concentrated Forces,” International Journal of Aeronautical and Space Sciences, Vol. 19, No. 1, pp. 80-88, Apr. 2018.

115. Nguyen, A. T., Han, J.-H., and Nguyen, A. T., “Application of Artificial Neural Networks to Predict Dynamic Responses of Wing Structures due to Atmospheric Turbulence,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 3, pp. 474-484, Sep. 2017.

114. Sung, Y.-H., Lee, D.-K., Han, J.-S., Kim, H.-Y., and Han, J.-H., “MSBS-SPR Integrated System Allowing Wider Controllable Range for Effective Wind Tunnel Test,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 3, pp. 414-424, Sep. 2017.

113. Nguyen, A. T., Han, J.-S. and Han, J.-H., “Effect of body aerodynamics on the dynamic flight stability of the hawkmoth Manduca sexta,” Bioinspiration & Biomimetics, Vol. 12, No. 1, Dec. 2016 .

112. Han, J.-S., Chang, J. W., and Han, J.-H., “An aerodynamic model for insect flapping wings in forward flight,” Bioinspiration & Biomimetics, Vol. 12, No. 3, Article ID 036004, Jun. 2017.

111. Han, J.-S., Chang, J.-W., Han. J.-H., “The advance ratio effect on the lift augmentations of an insect-like flapping wing in forward flight,” Journal of Fluid Mechanics, Vol. 808, No. 12, pp. 485-510 Dec. 2016 .

110. Nguyen, A.T., Kim, J.-K., Han, J.-S. and Han J.-H., “Extended Unsteady Vortex-Lattice Method for Insect Flapping Wings”, Journal of Aircraft, Vol. 53, No. 12, pp.1709-1718, Nov. 2016 (Published online: 23 May 2016) .

109. Lee, J., Hwang, D.-H., Jang, J.-K., Kim, D.-J., Lee, Y., Lee, J.-R., and Han, J.-H., “Pyroshock Prediction of Ridge-Cut Explosive Bolts Using Hydrocodes”, Shock and Vibration, Vol. 2016, Article ID 1218767, Sep. 2016. .

108. Na, T.-W, Choi. J.-H., Jung, J.-Y., Kim. H.-G., Han, J.-H., Park. K.-C., and Oh. I.-K., “Compact piezoelectric tripod manipulator based on a reverse bridge-type amplification mechanism.” Smart Materials and Structures, Vol. 25, No. 9, pp. 095028, August 2016. .

107. Jeong, H.-K., Lee, J., Han, J.-H., and Wereley, N.M., “Design of Frequency-tunable Mesh Washer Isolators Using Shape Memory Alloy Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 27, No. 9, pp. 1265-1280, May 2016. .

106. Lee, D.-K, Han, J.-H., “Safety-Guaranteed Flight Test Environment for Micro Air Vehicles,” AIAA Journal, Vol. 54, No. 3, pp. 1014-1025, Mar. 2016..

105. Lee, D.-O, Park, G., Han, J.-H., “Hybrid Isolation of Microvibrations induced by Reaction Wheel,” Journal of Sound and Vibration, Vol. 363, No. 17, pp. 1-17, Feb. 2016. .

104. Yun, J.-M., Kim, H.-Y., Kim, H.-I., Kwon, H.-J., Han, J.-H., “Performance evaluation method of homogeneous stereo camera system for full-field structural deformation estimation,” International Journal of Aeronautical and Space Sciences, Vol. 16, No. 3, pp. 380-393, September 2015. .

103. Kim, J.-K., Han,J.-S., Lee, J.-S., Han, J.-H., “Hovering and forward flight of the hawkmoth Manduca sexta: trim search and 6-DOF dynamic stability characterization”, Bioinspiration & Biomimetics, Vol. 10, pp.20, Sept. 2015 .

102. Han,J.-S., Kim, J.-K., Chang, J.-W., Han, J.-H., “An improved quasi-steady aerodynamic model for insect wings that considers movement of the center of pressure”, Bioinspiration & Biomimetics, Vol. 10, pp.14, Jul. 2015 .

101. Han,J.-S., Chang, J.-W., Kim, J.-K.,Han, J.-H., “Role of Trailing Edge Vortices on the Hawkmoth-like Flapping Wing”, Journal of Aircraft, Vol. 52, pp.1256-1266, Jul. 2015 .

100. Lee,D.-O., Park, G.-Y., Han, J.-H., “Experimental study on on-orbit and launch environment vibration isolation performance of a vibration isolator using bellows and viscous fluid”, Aerospace Science and Technology, Vol. 45, pp. 1-9, April. 2015 .

99. Lee, J.-S., Kim, J.-K., and Han, J.-H., ” Stroke Plane Control for Longitudinal Stabilization of Hovering Flapping Wing Air Vehicles”, Journal of Guidance, Control, and Dynamics,Vol. 38, No. 4, pp.800-805, April. 2015. .

98. Lee, J., Han, J.-H., Lee, Y., Lee, H., “A Parametric Study of Ridge-cut Explosive Bolts using Hydrocodes”, International Journal of Aeronautical and Space Sciences,Vol. 16, No. 1, pp. 50-63, Mar. 2015. .

97. Na, T.-W., Kang, D.-H., Jung, J.-Y., Han, J.-H., Oh, I.-K., “Linear-to-rotary motion converter using asymmetric compliant mechanics and single-crystal PMN-PT stack actuator,” Journal of Intelligent Material Systems and Structures, Vol. 25, No. 18, pp. 2221-2227, 2014..

96. Yoon, J.-S. and Han, J.-H., “One-equation modeling and validation of dielectric barrier discharge plasma actuator thrust”, Journal of Physics D: Applied Physics, Vol. 47, pp. 405202, Dec. 2014. .

95. Lee, J.-W., Han, J.-H., “Active Load Control of Wind Turbine Blade Section with Trailing Edge Flap: Wind Tunnel Testing”, Journal of Intelligent Material Systems and Structures, Vol. 25, pp. 2246-2255, Dec. 2014. .

94. Yoon, J.-S. and Han, J.-H., “Semi-empirical Thrust Model of Dielectric Barrier Plasma Actuator for Flow Control”, Journal of Aerospace Engineering, Vol. 28, pp.4014041,Dec. 2014. .

93. Kim, H.-Y., Lee, J.-S., Choi, H.-L., and Han, J.-H., “Autonomous Formation Flight of Multiple Flapping-wing Flying Vehicles Using Motion Capture System”, Aerospace Science and Technology, Vol. 39, pp. 596-604, Dec. 2014 .

92. Lee, J., Han, J.-H., Lee Y.J., and Lee, H.J., “Separation Characteristics Study of Ridge-Cut Explosive Bolts”, Aerospace Science and Technology, Vol. 39, pp. 153-168, Dec. 2014. .

91. Kim, H.-I., Han, J.-H., and Bang, H.-J., “Real-time deformed shape estimation of a wind turbine blade using distributed fiber Bragg grating sensors”, Wind Energy, Vol. 17, No. 9, pp. 1455-1467, 2014.

90. Jeong, H.-K., Han, J.-H., Youn, S.-H., and Lee, J., “Frequency Tunable Vibration and Shock Isolator using SMA Wire Actuator”, Journal of Intelligent Material Systems and Structures, Vol. 25, No. 7, pp. 908-919, 2014.

89. Park, J.-W., and Han, J.-H., “Sensitivity analysis of damping performances for passive shunted piezoelectrics” Aerospace Science and Technology, Vol. 33, No. 1, pp.16-25 2014 .

88. Park, G., Lee, D.-O., and Han, J.-H., “Development of multi-degree-of-freedom microvibration emulator for efficient jitter test of spacecraft”, Journal of Intelligent Material Systems and Structures, Vol. 25, No. 9, pp. 1069-1081, 2014 .

87. Yoon, J.-S., Kim, H.-I., Han, J.-H., and Yang, H.-S., “Effects of Dimensional Stability of Composites on Optical Performances of Space Telescopes,” Journal of Aerospace Engineering, Vol. 27 No. 1, pp.40-47, 2014 .

86. Kang, C.-G., Lee, J.-S, and Han, J.-H., “Development of bi-stable and millimeter-scale displacement actuator using snap-through effect for reciprocating control fins,” Aerospace Science and Technology, Vol. 32, No. 1, pp.131-141, 2014 .

85. Kim, J.-K., and Han, J.-H., “A multibody approach for 6-DOF flight dynamics and stability analysis of the hawkmoth Manduca sexta,” Bioinspiration & Biomimetics, Vol. 9, No. 1, 016011, 2014 .

84. Woo, S-H. and Han, J.-H ., “Mid frequency shock response determination by using energy flow method and time domain correction,”Shock and Vibration, Vol. 20, No. 5, pp.847-861, 2013 .

83. Kim, J.-K. and Han, J.-H., “Control Effectiveness Analysis of Hawkmoth Manduca Sexta: a Multibody Dynamics Approach,” International Journal of Aeronautical and Space Sciences, Vol. 14, No. 2, pp. 152-161, 2013 .

82. Lee, D.-K. , Lee, J-S. , Han, J.-H., and Yoshiyuki Kawamura.,”Dynamic calibration of magnetic suspension and balance system for sting-free measurement in wind tunnel tests”, Journal of Mechanical Science and Technology, Vol. 27, No. 7, pp.1963-1970, 2013.

81. Kim, H.-Y., Lee, J.-S., and Han, J.-H., “Indoor autonomous flight of ornithopter using motion capture system,” International Journal of Intelligent Unmanned Systems, Vol. 1, No. 3, pp. 204-214, 2013.  

80. Han, J.-H., Lee, D.-K., Lee, J.-S. and Chung, S.-J., “Teaching Micro Air Vehicles How to Fly as We Teach Babies How to Walk,” Journal of Intelligent Material Systems and Structures, Vol. 24, No. 8, pp. 936-944, 2013.  

79. Lee, J.-W., Kim, J.-K., Han, J.-H., and Shin, H.-K., “Active load control for wind turbine blades using trailing edge flap,” Wind & Structures,Vol. 16, No. 3, pp.263-278, Mar.2013.

78. Yoon, J.-S., Kim, H.-I., Han, J.-H., “Transverse Strain Effects on the Thermal Expansion Measurement of Composite Structure Using FBG Sensors: Experimental Validation,” Journal of Intelligent Material Systems and Structures, Vol. 24, No. 7, pp. 796-802, 2012. 

77. Lee, J.-W., Lee, J.-S., Han, J.-H., and Shin, H.-K., “Aeroelastic Analysis of Wind Turbine Blades based on Modified Strip Theory,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 110, pp. 62-69, Sept. 2012. 

76. Lee, J.-S., and Han, J.-H., “Experimental Study on the Flight Dynamics of a Bioinspired Ornithoper: Free Flight Testing and Wind Tunnel Testing,” Smart Materials and Structures, Vol. 21, No. 9, 094023 (11pp), Sept. 2012. 

75. Farinelli, C., Kim, H.-I., and Han, J.-H., “Feasibility Study to Actively Compensate Deformations of Composite Structure in a Space Environment,” International Journal of Aeronautical and Space Sciences, Vol. 13, No. 2, pp. 221-228, Jun. 2012. 

74. Lee, D.-O., Yoon, J.-S., and Han, J.-H., “Development of Integrated Simulation Tool for Jitter Analysis,” International Journal of Aeronautical and Space Sciences, Vol. 13, No. 1, pp. 64-73, Mar. 2012. 

73. Kim, J.-K., Lee, J.-S., and Han, J.-H., “Passive Longitudinal Stability in Ornithopter Flight,” Journal of Guidance, Control, and Dynamics, Vol. 35, No. 2, pp. 669-673, Mar.-Apr. 2012. 

72. Lee, J.-S., Kim, J.-K., Han, J.-H., and Ellington, C. P., “Periodic Tail Motion Linked to Wing Motion Affects the Longitudinal Stability of Ornithopter Flight,” Journal of Bionic Engineering, Vol. 9, No. 1, pp. 18-28, Mar., 2012. 

71.Park, K.-Y.,Han, J.-H., Kim, J.-H., Lee, S.-K., “Two-Layered Electromagnetic Wave Absorbing E-Glass/Epoxy Plain Weave Composites Containing Carbon Nanofibers and NiFe Particles,” Journal of Composite Materials, Vol. 45, No. 26, pp2773-2781, Dec, 2011. 

70.Kim, H.-I., Youn, J.-S., and Han, J.-H., “Transverse Strain Effects on the Measurement of the Thermal Expansion of Composite Structure using Surface Mounted Fiber Bragg Grating Sensors,” Journal of Intelligent Material Systems and Structures, Vol. 22, No. 11, pp.1141-1147, July, 2011. 

69.Lee, D.-O., Kang, L.-H., and Han, J.-H., “Active Vibration Isolation Demonstration System Using the Piezoelectric Unimorph with Mechanically Pre-stressed Substrate,” Journal of Intelligent Material Systems and Structures, Vol. 22, No. 13, pp. 1399-1409, Sep, 2011. 

68.Youn, S.-H., Jang, Y.-S., Han, J.-H., “Development of three-axis Hybrid Mesh Isolator using the Pseudoelasticity of Shape Memory Alloy,” Smart Materials and Structures, Vol. 20, No. 7, Article No. 075017(12pp), June, 2011. 

67.Lee, J.-S., Kim, J.-K., Kim, D.-K., Han, J.-H., “Longitudinal Flight Dynamics of Bio-inspired Ornithopter Considering Fluid-Structure Interaction.” AIAA Journal of Guidance, Control, and Dynamics, Vol. 34, No. 3, pp.667-677, May, 2011. 

66.Kang, L.-H., Lee,D.-O., Han, J.-H., “A measurement method for piezoelectric material properties under longitudinal compressive stress-a compression test method for thin piezoelectric materials,” Measurement Science and Technology, Vol. 22, No. 6, 065701(9pp), April, 2011. 

65.Kim,D.-K., Lee, J.-S., Han, J.-H.,“Improved Aerodynamic Model for Efficient Analysis of Flapping-Wing Flight,” AIAA Journal, Vol. 49, No. 4, pp. 868-872, April ,2011.

64.Park, K.-Y., Han, J.-H., Lee, S.-B., and Yi, J.-W., “Microwave absorbing hybrid composites containing Ni-Fe coated carbon nanofibers prepared by electroless plating,” Composites Part A, Vol. 42, No. 5, pp. 573-578, May, 2011. 

63.Kim, H.-I., Kang, L.-H., Han, J.-H., “Shape Estimation with Distributed Fiber Bragg Grating Sensors for Rotating Structures,” Smart Materials and Structures, Vol. 20, No. 3, 035011(11pp), 2011. 

62.Lee, D.-K., Lee, J.-S., Han, J.-H., and Chung, S.-J., “Development of a Simulator of an Magnetic Suspension and Balance System,” International Journal of Aeronautical and Space Sciences, Vol. 11, No. 3, pp. 175-183, 17 Apr. 2010. 

61.Kang, L.-H., Han, J.-H.,”Prediction of Actuation Displacement and Force of a Pre-stressed Piezoelectric Unimorph (PUMPS) Considering Nonlinear Piezoelectric Coefficient and Elastic Modulus” Smart Materials and Structures, Vol. 19, No. 9, Article No.094006(11pp), 2010. 

60.Lee, D.-O., Han, J.-H., Jang, H.-W., Woo, S.-H., Kim, K.-W.,”Shock Response Prediction of a Low Altitude Earth Observation Satellite During Launch Vehicle Separation” Int’l J. of Aeronautical & Space Sciences, Vol. 11, No. 1, pp.49-57, 2010. 

59. Kim, H.-I., Yoon, J.-S., Kim, H.-B., and  Han, J.-H., “Measurement of the thermal expansion of space structures using fiber Bragg grating sensors and displacement measuring interferometers,” Measurement Science and Technology, Vol. 21, No. 8, Article No.085704, 2010.

58. Pfeiffer, A.-T., Lee, J.-S., Han, J.-H., and Baier, H., “Ornithopter flight simulation based on flexible multi-body dynamics” Journal of Bionic Engineering, Vol. 7, No. 1, pp.102-111, 2010.

57. Yoon, S.-H., Jang, Y.-S., and Han, J.-H., “Compressed mesh washer isolators using the pseudoelasticity of SMA for pyroshock attenuation,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 4, pp. 407-421, 2010.

56.Kim,H.-I.,Kim,H.-Y.,Park,H.-J.,Han, J.-H.,Kim,J.-B.,Kim,D.-H.,and Han,J.-H.,”Development of point tracking system for measuring structural deformations using commercial video cameras,” International Journal of Aeronautical and Space Sciences, Vol. 10, No. 2, pp.86-94, 2009. 

55. Kundu, C. K., and Han, J.-H., “Vibration characteristics and snapping behavior of hygro-thermo-elastic composite doubly curved shells,” Composite Structures, Vol. 91, No. 3, pp.306-317, 2009. 

54. Kang, L.-H., Lee, J.-W., Han, J.-H., Chung, S.-J., and Ko, H.-Yo., “Development of a piezoelectric unimorph using a mechanically pre-stressed substrate,” Smart Materials and Structures, Vol. 18, No. 9, pp.104007, 2009. 

53. Park, K.-Y., Han, J.-H., Lee, S.-B., Kim, J.-B., Yi, J.-W., and Lee, S.-K., “Fabrication and electromagnetic characteristics of microwave absorbers containing carbon nanofibers and NiFe particles,” Composite Science and Technology, Vol. 69, No. 7-8, pp.1271-1278, 2009. 

52. Kundu, C. K., and Han, J.-H., “Nonlinear buckling analysis of hygrothermoelastic composite shell panels using finite element method,” Composites Part B:Engineering, Vol. 40, No. 4, pp.313-328, 2009. 

51. Kim, D.-K., Lee, M.-S., and Han, J.-H., “Substructure Synthesis Method for a Nonlinear Structure with a Sliding Mode Condition,” Journal of Sound and Vibration, Vol. 321, No. 3-5, pp. 704-720, 2009. 

50. Kundu, C. K., and Han, J.-H., “Vibration and Post-buckling Behavior of Laminated Composite Doubly Curved Shell Structures,” Advanced Composite Materials, Vol. 18, No. 1, pp.21-42, 2009.

49. Rapp, S., Kang, L.-H., Han, J.-H., Mueller, U. C., and Baier, H., “Displacement field estimation for a two-dimensional structure using fiber Bragg grating sensors,” Smart Materials and Structures, Vol. 18, 025006 (12pp), 2009. 

48. Kim, D.-K., Han, J.-H., and Kwon, K.-J., “Wind tunnel tests for a flapping wing model with a changeable camber using macro-fiber composite actuators,” Smart Materials and Structures, Vol. 18, 024008(8pp), 2009. 

47. Roh, J.-H., Han, J.-H., and Lee, I., “Damping Characteristics of  SMA Films and Their Application for Passive Vibration Isolation,” International Journal of Applied Electromagnetics and Mechanics, Vol. 27, No. 3, pp. 225-241, 2008.

46. Kim, D. K., Kim, H. I., Han, J. H., and Kwon, K. J, “Experimental Investigation on the Aerodynamic Characteristics of a Bio-mimetic Flapping Wing with Macro-Fiber Composites”, Journal of Intelligent Material Systems and Structures, Vol. 19, No. 3, pp.423-431, 2008. 

45. Yoo, E.-J., Roh, J.-H., and Han, J. H., “Wrinkling Control of Inflatable Booms Using Shape Memory Alloy Wires,” Smart Materials and Structures, Vol. 16, No. 2, pp. 340-348, 2007. 

44. Kang, L.-H., Kim, D.-K., and Han, J. H., “Estimation of Dynamic Structural Displacements Using Fiber Bragg Grating Strain Sensors”, Journal of Sound and Vibration, Vol. 305, No. 3, pp. 534-542, Aug., 2007. 

43. Park, K.-Y., Lee, S.-E., Kim, C.-G., and Han, J. H., “The Application of MWNT-added Glass Fabric/Epoxy Composites to Electromagnetic Wave Shielding Enclosures,” Composite Structures, Vol. 81, No. 3, pp. 401-406, 2007. 

42. Chang, Y.-H., Kim, D.-H., Han, J. H., and Lee, I., “Online Phase Tracking of Interferometric Optical Fiber Sensors for Vibration Control,” Journal of Intelligent Materials Systems and Structures, Vol. 18, No. 4 , pp 311-321, 2007. 

41. Jeon, J.-H., Oh, I.-K., Han, J. H., and Lee, S.-W., “Development of Bio-mimetic Patterned IPMC Actuators with Multiple Electrodes,” Key Engineering Materials, Vol. 334-335, pp. 1005-1008, 2007. Jan. (Non-SCI)

40. Lee, I., Roh, J.-H., Yoo, E.-J., and Han, J. H., “Configuration Control of Aerospace Structures with Smart Materials,” Journal of Advanced Science, Vol. 18, No. 1&2, pp. 1-5, 2006. (Non-SCI)

39. Roh, J.-H., Han, J. H., and Lee, I., “Numerical Modeling of Shape Memory Alloy Thin Film Actuators and Their Applications,” Key Engineering Materials, Vol. 321-323, pp. 186-191, 2006. Aug. (Non-SCI) 

38. Shen, X., Han, J. H., and Lee, I., “Study of Rainbow PZT Actuator and Its Integration with SMA,” Smart Materials and Structures,Vol. 15, No. 4, pp. N89-N93, 2006, Aug. 

37. Yang, S.M., Han, J. H., and Lee, I., “Characteristics of Smart Composite Wing with SMA Actuators and Optical Fiber Sensors,” International Journal of Applied Electromagnetics and Mechanics, Vol. 23, No. 3-4, pp. 177-186, 2006, July. 

36. Lee, S.-J., Lee, I., and Han, J. H., “Transonic Flutter Suppression of the 2-D Flap Wing with External Store using CFD-based Aeroservoelasticity,” KSAS International Journal, Vol. 7, No. 2, pp. 121-127, 2006. (Non-SCI)

35. Kim, D.-K., and Han, J. H., “Establishment of Gun Blast Wave Model and Structural Analysis for Blast Load,” AIAA Journal of Aircraft , Vol. 43, No. 4, pp. 1159-1168, 2006, July. 

34. Roh, J.-H., Han, J. H., and Lee, I., “Nonlinear Finite Element Simulation of Shape Adaptive Structures with SMA strip actuator,” Journal of Intelligent Materials Systems and Structures, Vol. 17, No. 11, pp. 1007-1022, 2006, Nov. 

33. Yang, S.-M., Roh, J.-H., Han, J. H., and Lee, I., “Experimental Studies on Active Shape Control of Composite Structures Using SMA Actuators,” Journal of Intelligent Materials Systems and Structures, Vol. 17, No. 8-9, pp. 767-777, 2006, Aug. 

32. Shin, W.H., Oh, I.K., Han, J. H., and Lee, I., “Aeroelastic Characteristics of Cylindrical Hybrid Composite Panels with Viscoelastic Damping Treatments,” Journal of Sound and Vibration, Vol. 296, No. 1-2, pp. 99-116, 2006, Sep. 

31. Chang, Y.-H., Kim, D.-H., Han, J. H., and Lee, I., “A Patch-type Smart Self-sensing Actuator,” Smart Materials and Structures, Vol. 15, No. 3, pp. 667-677, 2006, Jun. 

30. Han, J. H., Tani, J., and Qiu, J., “Active Flutter Suppression of a Lifting Surface Using Piezoelectric Actuation and Modern Control Theory,” Journal of Sound and Vibration, Vol. 291, No. 3-5, pp. 706-722, 2006. 

29. Kurkuri, M. D., Lee, J.-R., Han, J. H., and Lee, I., “Electroactive behavior of poly(acrylic acid) grafted poly(vinyl alcohol), their synthesis by Ce(IV) glucose redox system and characterization,” Smart Materials and Structures, Vol. 15, No. 2, pp. 417-423, 2006. 

28. Park, K.-Y., Lee, S.-E., Kim, C.-G., and Han, J. H., “Fabrication and Electromagnetic Characteristics of Electromagnetic Wave Absorbing Sandwich Structures,” Composite Science and Technology, Vol. 66, Issues 3-4, pp. 576-584, 2006. 

27. Kim, D.-H., Han, J. H., and Lee, I., “Vibration Measurement and Flutter Suppression Using Patch-type EFPI Sensor System,” KSAS International Journal, Vol. 6, No. 1, pp. 17-26, 2005. (Non-SCI)

26. Lee, I., Roh, J.-H., Yang, S.M., and Han, J. H., “Shape and vibration control of smart composite structures,” Advanced Composite Materials, Vol. 14, No. 2, pp. 121-130, 2005. 

25. Cho, K.-D., Lee, I., and Han, J. H., “Dynamic Characteristics of ER Fluid-filled Composite Plate Using Multielectrode Configuration,” Journal of Intelligent Material, Systems and Structures, Vol. 16, No. 5, pp. 411-419, 2005. 

24. Kim, D.-H., Chang, Y.-H., Han, J. H., and Lee, I., “Optical Phase Estimation for a Patch-type Extrinsic Fabry-Perot Interferometer Sensor System and Its Application to Flutter Suppression,” Smart Materials and Structures, Vol. 14, No. 4, pp. 696-706, 2005. 

23. Yoo, J.-H., Park, Y.-K., Lee, I., and Han, J. H., “Aeroelastic Analysis of a Wing with Freeplay in the Subsonic/Transonic Regions,” JSME International Journal, Series B, Vol. 48, No. 2, pp. 208-211, 2005. 

22. Kim, J.-Y., Kwon, H.-J., Kim, K.-S., Lee, I., and Han, J. H., “Numerical Investigation on the Aeroelastic Instability of a Complete Aircraft Model,” JSME International Journal, Series B, Vol. 48, No. 2, pp. 212-217, 2005. 

21. Kim, D.-K., Bae, J.-S, Lee, I., and Han, J. H., “Dynamic Model Establishment of a Deployable Missile Control Fin with Nonlinear Hinge,” AIAA Journal of Spacecraft and Rockets, Vol. 42, No. 1, pp. 66-77, 2005. 

20. Lee, I., Roh, J.-H., Kim, D.-H., and Han, J. H., “Applications of Smart Materials to Composite Structures,” Key Engineering Materials, Vol. 270-273, pp. 2193-2198, 2004. (Non-SCI) 

19. Roh, J.-H., Han, J. H., and Lee, I., “Effects of Shape Memory Alloys on Structural Modification,” Key Engineering Materials, Vol. 270-273, pp. 2120-2125, 2004. (Non-SCI)

18. Roh, J.-H., Oh, I.-K., Yang, S.-M., Han, J. H., and Lee, I., “Thermal Post-Buckling Analysis of Shape Memory Alloy Hybrid Composite Shell Panels,” Smart Materials and Structures, Vol. 13, No. 6, pp. 1337-1344, 2004. 

17. Choi, J.-H., Han, J. H., and Lee, I., “Transient Analysis of Thermoelastic Contact Behaviors in Composite Multi-Disk Brakes,” Journal of Thermal Stresses, Vol. 27, No. 12, pp. 1149-1167, 2004. 

16. Kim, D.-H., Han, J. H., and Lee, I., “Application of Fiber Optic Sensor and Piezoelectric Actuator to Flutter Suppression,” AIAA Journal of Aircraft, Vol. 41, No. 2, pp. 409-501, 2004.

15. Kim, D.-H., Han, J. H., Kim, D.-H., Lee, I., “Vibration Control of Structures with Interferometric Sensor’s Non-linearity,” Smart Materials and Structures, Vol. 13, No. 1, pp.92-99, 2004. 

14. Kim, D.-H., Han, J. H., Yang, S.-M., Kim, D.-H., Lee, I., Kim, C.-G., and Hong C.-S., “Optimal Vibration Control of a Plate Using Optical Fiber Sensor and PZT Actuator,” Smart Materials and Structures, Vol. 12, No. 4, pp. 507-513, 2003. 

13. Rew, K-H, Han, J. H., and Lee, I., “Multi-Modal Vibration Control Using Adaptive Positive Position Feedback,” Journal of Intelligent Material Systems and Structures, Vol. 13, No. 1, pp. 13-20, 2002. 

12. Oh, I.K., Han, J. H., and Lee, I., “Thermopiezoelastic Snapping of Piezolaminated Plates Using Layerwise Nonlinear Finite Elements,” AIAA Journal, Vol. 39, No. 6, pp. 1188-1197, 2001. 

11. Cho, K.D., Han, J. H., and Lee, I., “Vibration and Damping Analysis of Laminated Plates with Fully and Partially Covered Damping Layers,” Journal of Reinforced Plastics and Composites, Vol. 19, No. 15, pp. 1176-1200, 2000. 
Also, in the book Dynamic Mechanical Behavior of Composite Materials and Structures, Technomic Publishing Company, 2002.

10. Youn, S.-H., Han, J. H., and Lee, I., “Neuro-Adaptive Vibration Control of Composite Beams Subject to Sudden Delamination,” Journal of Sound and Vibration, Vol. 238, No. 2, pp. 215-231, 2000. 

9. Rew, K.-H., Han, J. H., and Lee, I., “On-line Frequency Estimation and Adaptive Vibration Control of Composite Structures with Delamination,” Key Engineering Materials, Vol. 183-187, pp. 1201-1206, 2000. (Non-SCI) 

8. Oh, I.K., Han, J. H., and Lee, I., “Postbuckling and Vibration Characteristics of Piezolaminated Composite Plate Subject to Thermopiezoelectric Loads,” Journal of Sound and Vibration, Vol. 233, No. 1, pp. 19-40, 2000. 

7. Han, J. H., Tani, J., Qiu, J., Kohama, Y., Shindo, Y., “A New Wall Motion Actuator using Magnetic Fluid and Elastic Membrane for the Laminar Flow Control,” Jounral of Intelligent Material Systems and Structures, Vol. 10, No. 2, pp. 149-154, 1999. 

6. Han, J. H., Tani, J., and Lee, I., “Multi-Modal Vibration Control of Smart Composite Plates,” Materials Science Research International, Vol. 5, No. 2, pp. 122-127, 1999. 

5. Han, J. H., and Lee, I., “Optimal Placement of Piezoelectric Sensors and Actuators for Vibration Control of a Composite Plate Using Genetic Algorithms,” Smart Materials and Structures, Vol. 8, No. 2, pp. 257-267, 1999. 

4. Han, J. H., Cho, K.-D., Youn, S.-H., and Lee, I., “Vibration and Actuation Characteristics of Composite Structures with a Bonded Piezo-Ceramic Actuator,” Smart Materials and Structures, Vol. 8, No. 1, pp. 136-143, 1999. 

3. Han, J. H., and Lee, I., “Analysis of Composite Plates with Piezoelectric Actuators for Vibration Control Using Layerwise Displacement Theory,” Composite Part B : Engineering, Vol. 29B, No. 5, pp. 621-632, 1998. 

2. Han, J. H., Rew, K.H., and Lee, I., “An Experimental Study of Active Vibration Control of Composite Structures with a Piezo-ceramic Actuator and a Piezo-film Sensor,” Smart Materials and Structures, Vol. 6, No. 5, pp. 549-558, 1997. 

1. Han, J. H., and Lee, I., “Active Damping Enhancement of Composite Plates with Electrode Designed Piezoelectric Materials,” Journal of Intelligent Material Systems and Structures, Vol. 8, No. 3, pp. 249-259, 1997.