[KAIST-SSHS-TN-2023]

 

1. KAIST-SSHS-TN-2023, Ji-Ho Jeong, “Theory and Research Status of Transperation Cooling”

 

2. KAIST-SSHS-TN-2023, Tae-Hyun Kim, “Design method of thickness-accommodated flat-foldable origami patterns without void”

 

3. KAIST-SSHS-TN-2023, Seung-Chan Lee, “Component Mode Synthesis Using MATLAB”

 

4. KAIST-SSHS-TN-2023, Yong-Ha Hwang, “Performance Analysis of Composite Energy-absorbing Structures Using ABAQUS/Explicit”

 

5. KAIST-SSHS-TN-2023, Keon-Ik Jang, “IOS Satellite Maneuver Simulation via Co-Simulation of RecurDyn and Simulink”

 

6. KAIST-SSHS-TN-2023, Kailash Dhital, “Linear Aeroelastic Analysis Using Doublet Lattice Method – MATLAB Program”

 

7. KAIST-SSHS-TN-2023, Tae-Hyun Kim, “Conceptual Design of an Origami-based Deployable Space Shield System”

 

 

 

[KAIST-SSHS-TN-2022]

 

1. KAIST-SSHS-TN-2022, Yong-Ha Hwang, “Structural Data Measurement Using DIC system”

 

2. KAIST-SSHS-TN-2022, Seung-Chan Lee, “Some Useful Tips in ANSYS Mechanical”

 

3. KAIST-SSHS-TN-2022, Tae-Hyun Kim, “Preliminary Design of Structural Model of Very-low Altitude Observation Satellite”

 

4. KAIST-SSHS-TN-2022, Tae-Hyun Kim, “Assembly Procedure Document for JUJAK-1 SM”

 

5. KAIST-SSHS-TN-2022, Ba-Woul Chung, “Force transmissibility analysis of hexapod isolator based on Stewart platform configuration”

 

6. KAIST-SSHS-TN-2022, Tae-Hyun Kim, “JUJAK-1 SM Structural Analysis”

 

7. KAIST-SSHS-TN-2022, Keon-Ik Jang, “JUJAK-1 SM Thermal Analysis & Thermal-Structure Coupled Analysis”

 

8. KAIST-SSHS-TN-2022, Tae-Hyun Kim, “Structural Data Measurement Using FBG Sensor”

 

 

 

[KAIST-SSS-TN-2021]

 

1. KAIST-SSS-TN-2021, Yong-Ha Hwang, “Axial Crashworthiness Performance Analysis Technique of crash box Using ANSYS”

 

2. KAIST-SSS-TN-2021, Ba-Woul Chung, “Craig-Bampton method and its application to multi-body dynamics analysis with flexible body”

 

3. KAIST-SSS-TN-2021, Hyun-Su Park, “Python Scripting method for Finite element Analysis”

 

4. KAIST-SSS-TN-2021, Kailash Dhital, “Linear and Nonlinear Aeroelastic Analysis Framework”

 

 

 

[KAIST-SSS-TN-2020]

 

11. KAIST-SSS-TN-2020, Park, Jeonghwan, “Tracking Dynamic Feature Points in a Video Stream with Optical Flow”

 

10. KAIST-SSS-TN-2020, Choi, Jaeyong (Andrew), “Introduction to Onboard Machine Learning System Raspberry Pi 4 with Intel Movidius Neural Computer Stick 2”

 

9. KAIST-SSS-TN-2020, Choi, Jaeyong (Andrew), “Introduction to NVIDIA Jetson TX2 with CNN Deep Learning Tutorials”

 

8. KAIST-SSS-TN-2020, Addo-Akoto, Reynolds, “Aerodynamic Force/Moment Measurement Using the Water Tank Set-up”

 

7. KAIST-SSS-TN-2020, Yang, Hyeon-Ho, “Aeroelastic Analysis of Flat Wing Using 2-D Unsteady Vortex Lattice Method”

 

6. KAIST-SSS-TN-2020, Hwang, Yong-Ha, “Weight Reduction Analysis of Hover Bike Frame Using Genetic Algorithm”

 

5. KAIST-SSS-TN-2020, Chung, Ba-Woul, “Considerations for 3D printing”

 

4. KAIST-SSS-TN-2020, Purtra, Genio Odi, “Laminated Composite Modeling and Analysis Methods using ANSYS ACP-Mechanical”

 

3. KAIST-SSS-TN-2020, Hwang, Yong-Ha, “ControlDesk set-up to utilize DAQ board-DS1202”

 

2. KAIST-SSS-TN-2020, Hwang, Dae-Hyun, “Mesh convergence for wave propagation analysis”

 

1. KAIST-SSS-TN-2020, Hwang, Dae-Hyun, “Important considerations when designing and manufacturing mechanical elements”

 

 

 

[KAIST-SSS-TN-2019]

 

20. KAIST-SSS-TN-2019, Suh, Jong-Eun, “Investigation on the shock attenuation rules, and application of it to derive the shock environment at the SAR antenna mounting I/F of the satellite”

 

19. KAIST-SSS-TN-2019, Suh, Jong-Eun, “ANSYS Sine-vibration analysis for deriving the sine-vibration environment at the SAR antenna mounting I/F: User manual and analysis environment”

 

18. KAIST-SSS-TN-2019, Yang, Hyeon-Ho, “Electromagnet Model of Cylindrical Neodymium Magnet and Design of Magnetic Bi-stable Mechanism”

 

17. KAIST-SSS-TN-2019, Choi, Jaeyong (Andrew), “Introduction to object detection using YOLOv3 and training with custom data set”

 

16. KAIST-SSS-TN-2019, Yang, Hyeon-Ho, “Laser Cutter Manual: Universal VLS”

 

15. KAIST-SSS-TN-2019, Kim, Tae-Hyun, “User Manual of ADAMS Dynamic Simulation for Analysis of SAR Antenna Vibration and Analysis Environment”

 

14. KAIST-SSS-TN-2019, Chung, Ba-Woul, “Approximation Method of Linear Lateral Sloshing using Equivalent Mechanical Model”

 

13. KAIST-SSS-TN-2019, Yun, Jong-Min, “Real-time numerical integration of acceleration sensor signal”

 

12. KAIST-SSS-TN-2019, Choi, Jaeyong (Andrew), “Brief Introduction to Convolutional Neural Networks (CNNs) with Basic Tutorials”

 

11. KAIST-SSS-TN-2019, Yang, Hyeon-Ho, “MPS(Moving Particle Simulation) using RecurDyn and Particleworks”

 

10. KAIST-SSS-TN-2019, Yang, Hyeon-Ho, “Revolute Robot Arm Control through Co-simulation of RecurDyn and Simulink”

 

9. KAIST-SSS-TN-2019, Choi, Jaeyong (Andrew), “ROS Installation Procedure with Guide for Motor and Manipulator Control”

 

8. KAIST-SSS-TN-2019, Yoon, Jong-Min, “Development of integrated linear flutter analysis module for emulated flutter test”

 

7. KAIST-SSS-TN-2019, Reynolds Addo-Akoto, “Flow Visualization around a Flapping Wing in Hover: Phase Lock DPIV method”

 

6. KAIST-SSS-TN-2019, Park, Hyun-Su, “Honeycomb sandwich panel insert production and installation manual”

 

5. KAIST-SSS-TN-2019, Hwang, Dae-Hyun, “INTEL MPI Setup for ANSYS AUTODYN Parallel Computing”

 

4. KAIST-SSS-TN-2019, Hwang, Dae-Hyun, “Pyrolock separation behavior simulation: formation and GUI”

 

3. KAIST-SSS-TN-2019, Kim, Ho-Young, “PIV Uncertainty Calculation”

 

2. KAIST-SSS-TN-2019, Kim, Ho-Young, “Linux – Environment Setup: Machine Learning”

 

1. KAIST-SSS-TN-2019, Yoon, Do-Hee, “Mathematical Model of Control Moment Gyroscope”

 

 

 

[KAIST-SSS-TN-2018]

 

14. KAIST-SSS-TN-2018, Kim, Tae-Hyun, “Establishment of Analysis Environment for Flexible Structure in MSC.ADAMS using MSC.PATRAN.”

 

13. KAIST-SSS-TN-2018, Park, Hyun-Su, “Honeycomb structure modeling and meshing methods for finite element analysis”

 

12. KAIST-SSS-TN-2018, Choi, Jaeyong (Andrew), “Introduction to Genetic Algorithm and Application in Structural Damage Detection”

 

11. KAIST-SSS-TN-2018, Suh, Jong-Eun, “Notes on MATLAB ODE solver”

 

10. KAIST-SSS-TN-2018, Lee, Jong-Wan and Kim, Dae-Yeon, “Multi-body modeling in MSC.ADAMS using the motion study of SOLIDWORKS”

 

9. KAIST-SSS-TN-2018, Dhital, Kailash, “Subsonic Flutter Emulation of Cantilever and Composite Plates: Numerical Approach”

 

8. KAIST-SSS-TN-2018, Kim, Dae-Yeon, “Establishing a simulation environment of a spin table system using ADAMS”

 

7. KAIST-SSS-TN-2018, Lee, So Jeong, “Manual and Characteristic of Pyroshock Simulator”

 

6. KAIST-SSS-TN-2018, Choi, Jaeyong (Andrew), “Basic knowledge of Video Motion Magnification Methods and Applications”

 

5. KAIST-SSS-TN-2018, Hwang, Dae-hyun, “Mechanical interaction simulation using MATLAB ODE45 solver ”

 

4. KAIST-SSS-TN-2018, Yun, Jong-Min, “Designing MIMO shaker force controller based on the inverse-transfer function matrix: The detailed overall procedure ”

 

3. KAIST-SSS-TN-2018, Yun, Jong-Min, “Development and validation of in-house program for post processing of modal testing data”

 

2. KAIST-SSS-TN-2018, Yoon, Do-Hee, “Mathematical model of Viscoelastic Material”

 

1. KAIST-SSS-TN-2018, Yoon, Do-Hee, “Modeling for Micro-vibration of reaction Wheel: Review on MIT Masterson’s Model”

 

 

 

[KAIST-SSS-TN-2017]

 

1. KAIST-SSS-TN-2017, Han, Jong-Seob, “Matlab-based Semi-empirical quasi-steady aerodynamic model for insect-like flapping wings”

 

 

 

[KAIST-SSS-TN-2016]

 

2. KAIST-SSS-TN-2016, Yun, Jong-Min, “Development and validation of in-house program for post processing of modal test data”

 

1. KAIST-SSS-TN-2016, Choi, Sang-Yeon, “Matlab-Simulink-MSC.Adams Integrated Simulation Environment”

 

 

 

[KAIST-SSS-TN-2015]

 

12. KAIST-SSS-TN-2015, Kwon, Chang Beom, “Attempts to use the MSBS in dynamic wind tunnel test and improvement plan of the MSBS”

 

11.KAIST-SSS-TN-2015, Han, Jong Seob, “Coordinate system of FWMAV”

 

10. KAIST-SSS-TN-2015, Kim, Joong-Kwan, “Adams/Flex Theory and an example of substructure synthesis”

 

9. KAIST-SSS-TN-2015, Dhital, Kailash, “Flutter Determinant of Simply Supported Rectangular Plate using Piston Theory”

 

8. KAIST-SSS-TN-2015, Lee, Juho, “Measurement and Data Processing of Pyroshock”

 

7. KAIST-SSS-TN-2015, Yoon, Jong-Min, “Principle and procedures of stereo camera calibration“

 

6. KAIST-SSS-TN-2015, Lee, Juho, “Separation Behaviour Analysis Procedure of Low-Shock Pyrotechnic Mechanical Devices for AUTODYN users”

 

5. KAIST-SSS-TN-2015, Hwang, Dae-Hyun,” Literature survey on separation devices using pyrotechnic mechanism”

 

4. KAIST-SSS-TN-2015, Nguyen, Anh Tuan, “Application of Unsteady Vortex lattice Method to Insect Flapping Wings”

 

3. KAIST-SSS-TN-2015, Choi, Sang-Yeon, “The effect of the abdomen deformation on the longitudinal stability of flying insects”

 

2. KAIST-SSS-TN-2015, Nguyen, Anh Tuan, “Unsteady Vortex Lattice Method Program for Low-Speed Aircraft”

 

1. KAIST-SSS-TN-2015, Kim, Joong-Kwan,”Matlab-Adams integrated environment”

 

 

 

[KAIST-SSS-TN-2014]

 

4. KAIST-SSS-TN-2014, Kwon, Chang-Bum, “Flexible multi-body dynamics Analysis”

 

3. KAIST-SSS-TN-2014, Choi, Sang-Yeon, “Aircraft wing structure analysis using ANSYS and Solidworks.”

 

2. KAIST-SSS-TN-2014, Hwang, Dae-Hyun, “Design of I-Beam girder of single girder overhead crane with low-headroom hoist using Solidworks and ANSYS workbench.”

 

1. KAIST-SSS-TN-2014, Lee, Juho, “Separation behavior analysis procedure of explosive bolts for ANSYS AUTODYN users.”

 

 

 

[KAIST-SSS-TN-2013]

 

3. KAIST-SSS-TN-2013, Yoon, Jong-Min, “DS1103 Manual – Installation & Application.”

 

2. KAIST-SSS-TN-2013, Park, Jae-Won, “KUH main rotor small-scale model wind tunnel test – SPR-based blade motion measurement, v.2.”

 

1. KAIST-SSS-TN-2013, Lee, Dong-Kyu, “Submission process and travel journal of ICRA.”

 

 

 

[KAIST-SSS-TN-2012]

 

3. KAIST-SSS-TN-2012, Park, Geeyong, “Space qualification test and basic material properties test of microvibration isolator constituent materials.”

 

2. KAIST-SSS-TN-2012, Kim, Joong-Kwan, “Passive flight stability inherent in flapping flight.”

 

1. KAIST-SSS-TN-2012, Park, Jae-Won, “KUH main rotor small-scale model wind tunnel test – SPR-based blade motion measurement.”

 

 

 

[KAIST-SSS-TN-2011]

 

7. KAIST-SSS-TN-2011, Lee, Jun-Seong/Park, Kyoung-Keun, “Aerodynamic coefficients extraction method of aircraft using SPR method.”

 

6. KAIST-SSS-TN-2011, Lee, Jun-Seong, “Stability of limit-cycle oscillation in ornithopter flight.”

 

5. KAIST-SSS-TN-2011, Park, Jae-Won, “Guide to Use an SDK2 and Real-time Processor of SPR System.”

 

4. KAIST-SSS-TN-2011, Kim, Hong-Il, “Shape estimation of the Wind Turbine Tower based on the Strain from surface mounted FBG sensors.”

 

3. KAIST-SSS-TN-2011, Park, Jae-Won, “Fundamentals of shunted Piezoelectric Damper.”

 

2. KAIST-SSS-TN-2011, Yoon, Jae-San, “SATELIT(Space-Airborne TELescope Image analysis Tool)-Optical performance modeling for image simulation.”

 

1. KAIST-SSS-TN-2011, Kang, Lae-Hyong, “User Manual of Aeroelastic Analysis Program Using DHM Aerodynamic Force.”

 

 

 

[KAIST-SSS-TN-2010]

 

18. KAIST-SSS-TN-2010, Lee, Jun-Seong/Kang, Choongil, “CEP improvement of short-range projectile using reciprocating air brakes.”

 

17. KAIST-SSS-TN-2010, Lee, Dong-Kyu, “Dynamic calibration method of MSBS.”

 

16. KAIST-SSS-TN-2010, Park, Jae-Won, “Analysis of Variance, ANOVA.”

 

15. KAIST-SSS-TN-2010, Lee, Dong-Kyu, “How to make animation using MATLAB.”

 

14. KAIST-SSS-TN-2010, Yoon, Jae-San, “Micro displacement measurement system design – using optical scale sensor.”

 

13. KAIST-SSS-TN-2010, Park, Jae-Won, “Detailed Instructions and Application on Eagle Motion Capture System.”

 

12. KAIST-SSS-TN-2010, Park, Jae-Won, “Summary of Instructions on Eagle Motion Capture System.”

 

11. KAIST-SSS-TN-2010, Yoon, Jae-San, “Optic–Structure Performance Analysis (OSPA)-Frame tool configuration.”

 

10. KAIST-SSS-TN-2010, Lee, Jong-Won, “Aerodynamics of Wind Turbine.”

 

9. KAIST-SSS-TN-2010, Lee, Jong-Won, “NREL 5MW Wind Turbine Geometric Data.”

 

8. KAIST-SSS-TN-2010, Lee, Jong-Won, “Load Prediction of Wind Turbine Blade using MST and ADAMS.”

 

7. KAIST-SSS-TN-2010, Lee, Jong-Won, “Verification of Wind Turbine Blade Structural Model using MSC/NASTRAN.”

 

6. KAIST-SSS-TN-2010, Lee, Dong-Kyu, “Simulation of 6-DOF Control of Magnetic Suspension and Balance System.”

 

5. KAIST-SSS-TN-2010, Kang, Lae-Hyong, “How to Make Animation Using Tecplot.”

 

4. KAIST-SSS-TN-2010, Kim, Joong-Kwan, “How to use MSC.ADAMS User-defined Subroution.”

 

3. KAIST-SSS-TN-2010, Yoon, Jae-San, “Chamber Component and Manual.”

 

2. KAIST-SSS-TN-2010, Lee, Dae-Oen, “Hybrid Vibration Isolation in Space Structures: Past Programs.”

 

1. KAIST-SSS-TN-2010, Lee, Dae-Oen, “Passive Damping Materials and Devices.”

 

 

 

[KAIST-SSS-TN-2009]

 

12. KAIST-SSS-TN-2009, Lee, Dae-Oen, “Experimental statistical energy analysis.”

 

11. KAIST-SSS-TN-2009, Lee, Jun-Seong, “Modified strip Theory.”

 

10. KAIST-SSS-TN-2009, Lee, Jun-Seong, “Modified Seares’s Approach.”

 

9. KAIST-SSS-TN-2009, Lee, Jun-Seong, “A study on longitudinal flight trajectory optimization of model ornithopter.”

 

8. KAIST-SSS-TN-2009, Lee, Jun-Seong, “Optimal longitudinal flight controller design of ornithotper via bang-bang control and LQR control.”

 

7. KAIST-SSS-TN-2009, Lee, Jun-Seong, “A study on the flight simulation of flapping-wing flight.”

 

6. KAIST-SSS-TN-2009, Lee, Dong-Hun, “Development for the high-precision CTE measurement system.”

 

5. KAIST-SSS-TN-2009, Kim, Hong-Il, “3D formulation of the surface attached FBG sensors for measuring thermal expansion of the composite structure,”

 

4. KAIST-SSS-TN-2009, Kim, Hong-Il, and Lee, Dae-Oen, “Modal test using Pulse signal analyzer.”

 

3. KAIST-SSS-TN-2009, Kim, Hong-Il, “ANSYS parametric design language.”

 

2. KAIST-SSS-TN-2009, Lee, Dong-Hun, “Procedures for CTE/CME measurement of composite materials used in space environment.”

 

1. KAIST-SSS-TN-2009, Kang, Lae-Hyong, and Lee, Dong-Kyu, “Manufacturing method for FBG sensors.”

 

 

 

[KAIST-SSS-TN-2008]

 

9. KAIST-SSS-TN-2008, Lee, Jin-Young, “A study on modified strip theory for flapping-wing flight.”

 

8. KAIST-SSS-TN-2008, Kim, Hong-Il, “CTE measurement system with displacement measuring interferometer.”

 

7. KAIST-SSS-TN-2008, Lee, Dong-Hun, “Fabrication method for multilayer PZT.”

 

6. KAIST-SSS-TN-2008, Park, Ki-Yeon, “Measurement of permittivity and permeability of composite specimens using network analyzer.”

 

5. KAIST-SSS-TN-2008, Kim, Hong-Il, “Report for IPMC Manufacturing.”

 

4. KAIST-SSS-TN-2008, Lee, Jun-Seong, “Versa LASER Manual – Maintenance & Application.”

 

3. KAIST-SSS-TN-2008, Lee, Dong-Kyu, “How to use microprocessor.”

 

2. KAIST-SSS-TN-2008, Lee, Dong-Hun, and Lee, Dae-Oen, “Report on the measurement of mechanical properties of composite materials used in aerospace.”

 

1. KAIST-SSS-TN-2008, Lee, Dae-Oen, and Lee, Dong-Hun, “Tensile and shear experiment for determining mechanical properties of a composite.”

 

 

 

[KAIST-SSS-TN-2006]

 

1. KAIST-SSS-TN-2006, Oh, Seung-Hoon, “Thermal Deformation & Vibration Analysis: The Effects of Calculation manners & methods.”