281. Dhital, K., Lee, S.-G., and Han, J. -H., “Flutter control of an airfoil with camber morphing near ground,” ICSV29, 2023, Prague, Czech, July 09-13, 2023.

280. Chung, B., Lee, S.-C., Lee, J.-K., Kang, J.-M., Song, T.-S., Song, D.-K., and Han, J. -H., “Development of multi-axis microvibration isolator based on Stewart platform,” ICSV29, 2023, Prague, Czech, July 09-13, 2023.

279. Chung, B., Erturk, A., and Han, J. -H., “Resonator positioning for enlarged bandgap in mechanical metastructure with finite resonators,” SPIE SS+NDE 2023, Long Beach, CA, USA, March. 13-17, 2023.

278. Park, H.-S., Yang, J., and Han, J. -H., “Experimental analysis on nonlinear elastic wave characteristics of metallic origami cylinder,” SPIE SS+NDE 2023, Long Beach, CA, USA, March. 13-17, 2023.

277. Jang, K.-I, Kim, T. -H., and Han, J.-H., “Design and Deployment analysis of Origami-Based Truncated Conical Shape,” The 2022 Asia-Pacific International Symposium on Aerospace Technology, Niigata, Japan, October 12-14, 2022.

276. Addo-Akoto, Reynolds, Han, J. -S., and Han, J.-H., “Effects of Aspect Ratio on Aerodynamic Performance of Negatively Twisted,” The 2022 Asia-Pacific International Symposium on Aerospace Technology, Niigata, Japan, October 12-14, 2022.

275. Han, Y. -J., Yang, H. -H., Lee, S. -G., and Han, J.-H., “Optimal Design and Analysis of Twist-Coupled Flapping Mechanism,” The 2022 Asia-Pacific International Symposium on Aerospace Technology, Niigata, Japan, October 12-14, 2022.

274. Lee, S. -C., Chung, B., Kim, J. -G., and Han, J.-H., “Comparison of Coupled Loads Analysis of a Launch Vehicle in Accordance with Component Mode Synthesis Methods,” The 2022 Asia-Pacific International Symposium on Aerospace Technology, Niigata, Japan, October 12-14, 2022.

273. Chung, B., Lee, S. -C., Jang, K. -I, Song, T., Song, D. -K., and Han, J.-H., “Design and Performance Test of Hexapod Micro-vibration isolator for High Torque CMG,” International Astronautical Congress 2022, Paris, FR, September 18-22, 2022.

272. Yang, H. -H., Lee, S. -G., Han, Y. -J., and Han, J.-H., “Optimal Hovering Wing Kinematics of Flapping-Wing Model Using Reinforcemnet Learning” ICAS 2022, Stockholm, Sweden, September 4-9, 2022.

271. Lee, S. -G., Yang, H. -H., Han, Y. -J., and Han, J.-H., “Design of an Efficient Climbing Flight Trajectory for a Flapping-Wing Micro Air Vehicle,” ICAS 2022, Stockholm, Sweden, September 4-9, 2022.

270. Marconi, L., Hwang, Y.,-H., Han, J.-H., Giacomo Frulla, and Enrico Cestino, “Energy-Absorbing Origami Structure for Crashworthiness Design,” SPIE SS+NDE 2022, Long Beach, CA & Virtual, March 6-9, 2022.

269. Kim, T.-H. Alzaabi, A., Suh, J.-E., and Han, J.-H., “A Unit-separable Earth Observation CubeSat Structure Concept Using Flat-retractable Truss Structure,” SPIE SS+NDE 2022, Long Beach, CA & Virtual, March 6-9, 2022.

268. Choi, A. J., Park, J., and Han, J.-H., “Automated Aerial Docking System using Vision-Based Deep Learning,” SciTech 2022, San Diego, CA & Virtual, Jan. 3-7, 2022.

267. Park, J.-H., and Han, J.-H., “A perception and control system for in-flight collision avoidance of UAVs,” 2021 AIAA Region VII Student Paper Conference, Online, Nov. 29-30, 2021.

266. Choi, A. J., Park, J.-H., and Han, J.-H., “Development of bi-stable based aerial integration and separation mechanism.” The 2021 Asia-Pacific International Symposium on Aerospace Technology, Jeju, Korea, Nov. 15-17, 2021.

265. Suh J.-E., Kim, T.-H., Chung, B.-W., and Han, J.-H., “Vibration isolator based on the reconfigurable origami module.” The 2021 Asia-Pacific International Symposium on Aerospace Technology, Jeju, Korea, Nov. 15-17, 2021.

264. Park, H.-S., Hwang, D.-H, Yang, J., and Han, J.-H., “Experimental study on attenuation performance of shock-absorbing insert.” ICAS 2021, Online, Sep. 06, 2021

263. Chung, B.-W., Kim, T.-H., Suh, J.-E., and Han, J.-H., “A meter-class tape spring deployable structure for microsatellite,” SPIE Smart Structures + Nondestructive Evaluation 2021, Online, Mar. 22-26, 2021.

262. Park, J.-H., Choi, A. J., and Han, J.-H., “Avoiding collision with moving obstacles for UAVs using robust ego-motion estimation technique.” SPIE Smart Structures + Nondestructive Evaluation 2021, Online, Mar. 22-26, 2021.

261. Suh, J.-E., Yang, J., and Han, J.-H., “Origami-based deployable tubular structure with Yoshimura pattern.” SPIE Smart Structures + Nondestructive Evaluation 2021, Online, Mar. 22-26, 2021.

260. Choi, A. J., Park, J.-H., and Han, J.-H., “Development of mid-air autonomous aerial docking system using onboard machine learning computations,” SPIE Smart Structures + Nondestructive Evaluation 2021, Online, Mar. 22-26, 2021.

259. Sung, Y.-H., and Han, J.-H., “Magnetic levitation based flight test environment for intelligent aerial vehicles,” AIAA SciTech 2021 Forum, Online, Jan. 11-15 & 19-21, 2021. (oral-only).

258. Addo-Akoto, R., Han, J.-S., and Han, J.-H., “Effects of sweep-motion profile on rigid and flexible flapping-wing aerodynamics,” AIAA SciTech 2021 Forum, Online, Jan. 11-15 & 19-21, 2021.

257. Yang, H.-H. and  Han, J.-H., “Design of Revolute Joint with Bi-Stability Using Permanent Magnets,” ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Online, Sep. 14 – Sep. 15, 2020.

256. Yang, H.-H., Dhital, K., and  Han, J.-H., “Aeroelastic Analysis of Two-Dimensional Tandem Wing using Vortex Lattice Method,” Inter-Noise 2020, Online, Aug. 23 – Aug. 26, 2020.

255. Dhital, K., Nguyen, A. T., and Han, J.-H., “Aeroelastic analysis of airfoils at proximity with structural coupling,” Inter-Noise 2020, Online, Aug. 23 – Aug. 26, 2020.

254.  Nguyen, A. T., Thanh Le, V. D., Phung, V. B., Pham, T. D., and Han, J.-H., “The beam modeling of the hawkmoth wing structure,” SPIE Smart Structures + Nondestructive Evaluation 2020, Online, Apr. 27 – May. 01, 2020.

253.  Hwang, D.-H., Park, H.-S., and Han, J.-H., “Experimental and numerical study on shock reduction on thin plate with elastic patch,” SPIE Smart Structures + Nondestructive Evaluation 2020, Online, Apr. 27 – May. 01, 2020.

252. Kim., T.-H., Suh, J.-E., and Han, J.-H., “Kinematic analysis of a deployable truss structure with flat-form storability,” SPIE Smart Structures + Nondestructive Evaluation 2020, Online, Apr. 27 – May. 01, 2020.

251. Yun, J.-M., and Han, J.-H., “Development of Ground-Vibration-Test Based Aeroelastic Flutter Emulation Technique,” The 38th IMAC conference 2020, Houston, USA, Feb. 10-13, 2020.

250. Sung, Y,-H., Kim, H.-Y.,  Han, J.-H., Lee, D.-Y., “Self-learning MAV under safety-guaranteed flight test environment,” AIAA SciTech Forum 2020, Orlando, Florida, USA, Jan. 06-10, 2020.

249. Suh, J.-E., Kim, T.-H., and Han, J.-H., “New Folding Concept on the Cylindrical Structure with Yoshimura Pattern: Folding pattern analysis,” AIAA SciTech Forum 2020, Orlando, Florida, USA, Jan. 06-10, 2020.

248. Yun, J.-M. Yun and Han, J.-H., “Development of aeroelastic flutter emulation  test technique,” 2019 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2019), Gold Coast, Austrailia, Dec. 04-06, 2019.

247. Han, J.-H., Suh, J.- E., Kim, T.-H.,  and , “Deployable Structure Studies at KAIST AE,” The 4th International Conference on Active Materials and Soft Mechatronics, Incheon, South Korea, Oct. 16-19, 2019.

246. Hwang, D.-H., Park, H.-S. Park, and Han, J.-H.,  “Manipulating Lamb Wave Propagation on a Plate Structure,” The 4th International Conference on Active Materials and Soft Mechatronics, Incheon, South Korea, Oct. 16-19, 2019.

245. Hwang, D.-H. and Han, J.-H., “Shock reduction on a thin plate using elastic wave refraction patch,” 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montreal, Canada, Oct. 07-11, 2019.

244. Addo-Akoto, R., Han, J.-S. and Han, J.-H., “Wing-wake interaction of insect-like flapping wing in hover: effect of aspect ratio and kinemativs at Re~10^4,” ASME-JSME-KSME Joint Fluids Engineering Conference 2019, San Francisco, California, USA, Jul. 27 – Aug. 1, 2019.

243. Han, J.-S, and Han, J.-H., “Wake Behavior around Flapping wings of Model Hawkmoth Moving Sideways,” ASME-JSME-KSME Joint Fluids Engineering Conference 2019, San Francisco, California, USA, Jul. 27 – Aug. 1, 2019.

242. Kim, H.-H., Kim, H.-Y., Han, J.-S. and Han, J.-H., “Development of a variable-incidence-angle vortex generator for surface contaminated wind-turbine blades,” SPIE Smart Structures/NDE Conference, Denver, Colorado, USA, Mar. 03-07, 2019.

241. Hwang, D.-H., Han, J.-H., Lee, J., Lee, Y. and Kim, D., “Performance optimization of a split type low-shock separation bolt,” AIAA SciTech 2019 Forum, San Diego, California, USA, Jan. 7 – 11, 2019.

240. Lee, J.-W., Han, J.-S. and Han, J.-H., “Forward Flight Control Analysis of Bioinspired Flapping-Wing Micro Air Vehicle,” 10th International Micro-Air Vehicles Conference (iMAV2018), Melbourne, Australia, Nov. 17 – 23, 2018.

239. Han,J-H , Addo-Akoto, R, Kang, C.-G. and Lee, J.-S., “On-Off Actuator using Buckled Bistable Beam,” The 3rd International Workshop on Active Materials and Soft Mechatronics, Daejeon, Korea, Oct. 23 – 26, 2018.

238. Park, H.-S., Hwang, D.-H., Han, J.-H., “Shock wave propagation analysis on honeycomb sandwich structure with insert system,” 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT2018), Chengdu, China, Oct. 16 – 18, 2018.

237. Hwang, D.-H., Park, H.-S., Han, J.-H., “Experimental study on the shock propagation and attenuation of the structural joints,” 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT2018), Chengdu, China, Oct. 16 – 18, 2018.

236. Kim, H.-H., Kim, H.-Y., Han, J.-S. and Han, J.-H., “Development of Variable-Incidence-Angle Vortex Generator for Wind-Turbine Blades,” 29th International Conference on Adaptive Structures and Technologies (ICAST2018), Seoul, South Korea, Sep. 30 – Oct. 4, 2018.

235. Suh, J.-E, Jeong S.-Y. and Han, J.-H., “Deployable truss structure with shape memory alloy spring : Application of the bistability,” 29th International Conference on Adaptive Structures and Technologies (ICAST2018), Seoul, South Korea, Sep. 30 – Oct. 4, 2018.

234.  Addo-Akoto, R. and Han, J.-H., “Bi-directional Actuation Of Buckled Beam For Use As An Actuator,” 29th International Conference on Adaptive Structures and Technologies (ICAST2018), Seoul, South Korea, Sep. 30 – Oct. 4, 2018.

233. Choi, A. J. and Han, J.-H., “Vibration-Based Damage Detection on Structure using Real-value Genetic Algorithm,” 29th International Conference on Adaptive Structures and Technologies (ICAST2018), Seoul, South Korea, Sep. 30 – Oct. 4, 2018.

232. Sung, Y.-H., Kim, D.-K., Kim, H.-Y. and Han, J.-H., “Flight test environment using magnetic levitation for flight characteristics identification of MAV,” 29th International Conference on Adaptive Structures and Technologies (ICAST2018), Seoul, South Korea, Sep. 30 – Oct. 4, 2018.

231. Lee, J.-W., Nguyen, A. and Han, J.-H., “Longitudinal Flight Control of Bio-Inspired Flapping-Wing Micro Air Vehicle with Extended Unsteady Vortex-Lattice Method,”  31st Congress of the International Council of the Aeronautical Sciences, Belo Horizonte, Brazil, Sep. 09-14, 2018.

230. Sung, Y.-H., Han, J.-S. and Han, J.-H., “Unsteady aerodynamic characteristics of the oscillating airfoil using MSBS,” 31st Congress of the International Council of the Aeronautical Sciences, Belo Horizonte, Brazil, Sep. 09-14, 2018.

229. Han, J.-S., Kim, H.-Y., Lee J.-W. and Han, J.-H., “Empirical approach for aerodynamic force estimation on flapping wings and its application,” 14th International Conference on Intelligent Unmanned Systems (ICIUS 2018), Jeju, South Korea, Aug. 20-23, 2018.

228. Yun, J.-M., Dhital, K. and Han, J.-H., “Emulated flutter test technique using multiple electro-dynamic shakers,” 14th International Conference on Motion and Vibration, Daejeon, Korea, Aug. 05-08, 2018.

227. Yoon, D.-H., Suh, J.-E., and Han, J.-H., “Mathematical Modeling of Vibration Isolator for Control Moment Gyroscope,” 14th International Conference on Motion and Vibration, Daejeon, Korea, Aug. 05-08, 2018.

226. Han. J.-S. and Han, J.-H., “The effects of wakes on aerodynamic characteristics of flapping wings in clap-and-fling motino at Re of ~10^4,” 5th Joint US-European Fluids Engineering Division Summer Meeting (FEDSM2018), Montreal, Quebec, Canada, Jul. 15-20, 2018.

225. Addo-Akoto, R., Suh, J.-E., Lee, J.-W., Han, J.-S., and Han, J.-H., “Bistable Beam Actuation with Twisted Strings,” 2018 SPIE Smart Structures/NDE Conference, Denver, Colorado, USA, Mar. 04-08, 2018.

224. Suh, J.-E., Jeong, S.-Y., and Han, J.-H., “Conceptual Design and Dynamic Analysis of Bistable Deployable Structure”, 2018 SPIE Smart Structures/NDE Conference, Denver, Colorado, USA, Mar. 04-08, 2018.

223. Lee, J.-W., Nguyen, A., and Han, J.-H., “Transition Flight Control Simulations of Bioinspired FWMAV with Extended Unsteady Vortex-Lattice Method”, 2018 SPIE Smart structures/NDE conference, Denver, Colorado, USA, Mar. 04-08, 2018.

222. Han, J.-H., ACMAE (2017) in Yokohama, Keynote Speech on “Smart Materials Systems to Mitigate Some Vibration and Shock Problems in Aerospace System”.

221. Hwang, D.-H., Han, J.-H., Lee, Y., and Kim, D., “Mathematical model formulation and validation for split-type low shock separation bolt using initiator,” The 6th International Symposium on Energetic Materials and their applications, Sendai, Japan, Nov. 6-10, 2017.

220. Hwang, D.-H., Han, J.-H., Lee, Y., and Kim, D., “Analysis of performance change according to amount of propellant using mathematical model for ball-type separation bolt,” The 2017 Asia-Pacific International Symposium on Aerospace Technology, Seoul, Korea, Oct. 16-18, 2017.

219. Lee, S., Hwang, D.-H., and Han, J.-H., “Development of a compact and portable pyroshock simulator for a pyroshock test,” The 2017 Asia-Pacific International Symposium on Aerospace Technology, Seoul, Korea, Oct. 16-18, 2017.

218. Dhital, K., and Han, J.-H., “Subsonic Flutter Emulation of Composite Laminate Using a Few Concentrated Forces,” 21st International Conference on Composite Materials, Xi’an, China, Aug. 21-25, 2017.

217. Addo-Akoto, R., Yun, J.-M., and Han, J.-H., “Snap-Through Motion Estimation of a Buckled Bistable Composite Beam,” 21st International Conference on Composite Materials, Xi’an, China, Aug. 21-25, 2017.

216. Sung, Y.-H., Kim, H.-Y., and Han, J.-H., “Pseudo Flight Test Environment for MAV”, 13th International Conference on Intelligent Unmanned Systems, Tamkang Univ., Taiwan, Aug. 21-24, 2017.

215. Kim, H.-Y., Han, J.-H., “WIND-TURBINE VIBRATION REDUCTION USING FLOW CONTROL DEVICES”, ASME 2017 Fluids Engineering Division Summer Meeting, Waikoloa, Hawaii, USA, Jul 31, 2017.

214. Anh Tuan Nguyen, Han, J.-H., Keynote Speech on “Dynamic Stability of Flapping-Wing Micro Air Vehicles with Unsteady Aerodynamic Model”, ASME 2017 Fluids Engineering Division Summer Meeting, Waikoloa, Hawaii, USA, Jul 31, 2017.

213. Han, J.-S., Lee, J.-W., Han, J.-H., “Towing Tank Experiments for Flapping-Wing Aerodynamics”, ASME 2017 Fluids Engineering Division Summer Meeting, Waikoloa, Hawaii, USA, Jul 31, 2017.

212. Han, J.-S., and Han, J.-H., “Near-wake characteristics of a flapping wing in forward flight”, The 12th International Symposium on Particle Image Velocimetry, Busan, Korea, Jun. 19-21, 2017.

211. Kim, H.-Y., Kim, H.-H., Han, J.-S., and Han, J.-H., “Development of flow separation control system to reduce the vibration of wind turbine blades”, 2017 SPIE Smart structures/NDE conference, Portland, Oregon, USA, Mar. 25-29, 2017.

210.  Ha, D.-H., Kim, J.-K., Choi, S.-Y., and Han, J.-H., “The Trim Condition of a Hovering Insect-like Flapping-wing Micro Air Vehicle in Asymmetric Condition”, 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, USA, Jan 9-13, 2017

209.  Dhital, K., Han, J.-H., “Emulated Panel Flutter of a Composite Structure Using Concentrated Forces”, ACCM, Busan, Korea, Oct 16-19, 2016

208.  Dhital, K., Han, J.-H, “Feasibility Study of Emulated Panel Flutter by Replacing Aerodynamic Forces with a Few Concentrated Forces”, APISAT 2016, Toyama, Japan, Oct. 25-27, 2016

207. Nguyen, A. T., Han, J.-H, “Hovering Flight Performance of an Insect in Ground Effect”, APISAT 2016, Toyama, Japan, Oct. 25-27, 2016

206.Park, T.-H., Han, J.-H, “Effect of Rigid Body Mode in Gust Response Analysis”, APISAT 2016, Toyama, Japan, Oct. 25-27, 2016

205. Suh, J.-E., Jung, S.-Y., Han, J.-H, “Deployable structure with bistability : Concept design and mathematical modeling”, APISAT 2016, Toyama, Japan, Oct. 25-27, 2016

204. Sung, Y.-H., Kim, H.-Y., Han, J.-H, “Pseudo Flight Test Environment with the Expanded Range for Micro Air Vehicles”, ICAST 2016, Lake George, NY, USA, Oct. 3-5, 2016

203. Nguyen, A.T., Kim, J.-K., Han, J.-H., “The Effects of Body Aerodynamics On The Dynamic stability of insect flight”, ICAS, Daejeon, Korea, Sep 25-36, 2016

202. Yun, J.-M., Han, J.-H., “Selection of parameters in SPR camera system for structural health monitoring of aircraft main wing”, ICAS, Daejeon, Korea, Sep 25-36, 2016

201. Ha, D.-H., Kim, J.-K., Choi, S.-Y., Han, J.-H, “The Trim Search of Hovering Insect-like Flapping-Wing Micro Air Vehicle”, ICIUS, Xian, China, Aug. 23-25, 2016

200. Hwang, D.-H., Lee, J., Han, J.-H., Lee, Y., Kim, D.,” Mathematical modeling for separation behavior of pyrotechnic separation device”, IPS, Colorado, USA, Jul. 10-15, 2016

199. Addo-Akoto, R, Han, J.-H., “Actuation of Buckled Bi-stable Plate using Electromagnets”, ERMR, Incheon, Korea, Jul. 4-8, 2016

198. Suh, J.-E. Jeong, S.-Y., Han, J.-H., “Bistable Deployable Structure using SMA Spring”, ERMR, Incheon, Korea, Jul. 4-8, 2016

197. Kim, H.-Y., Han, J.-H., “Flow separation control using Plasma actuator to reduce the vibration of airfoil”, ERMR, Incheon, Korea, Jul. 4-8, 2016

196. Lee, J.-H., Hwang, D.-H., Jang, J.-K., Lee, J.-R., Han, J.-H, “Nondestructive Evaluation of Pyroshock Propagation Using Hydrocodes”, SPIE Smart Structure/NDE, Las Vegas, Nevada, USA, Mar. 20-24, 2016

195. Nguyen, A. T., Han, J.-H, “Effects of Fluid-Structure Interaction on the Aerodynamics of an Insect Wing”, SPIE Smart Structure/NDE, Las Vegas, Nevada, USA, Mar. 20-24, 2016

194.Choi, S.-Y., Kim, J.-K., Han, J.-S., Han, J.-H., “Transition Flight Control of Flapping Wing Micro Air Vehicle (FWMAV) with Gain-Scheduled Reference Tracking Augmented LQR Controller”, ISNIT 2016, Daejeon, Korea, Jan 14, 2016

193.Han, J.-S., Han, J.-H., Chang, J.-W., “Study on insect flight based on dynamic similarity: high-precision robotic wing model and servo-driven towing tank”, ISNIT 2016, Daejeon, Korea, Jan 14, 2016

192.Park, G., Lee, D.-O., Han, J.-H., “Design of three parameter isolator for the RWA disturbance considering flexible structural effects”, AIAA Scitech 2016, San Diego California, USA, Jan 5, 2016

191.Han, J.-S., Han, J.-H., Chang, J.-W., “Effects of Advance Ratios on the Aerodynamic Characteristics of an Insect Wing in Forward Flight”, AIAA Scitech 2016, San Diego California, USA, Jan 5, 2016

190.Kim, J.-K., Han, J.-S., Choi, S.-Y., Han, J.-H., “Dynamic Stability of a Hawkmoth-scale Flapping-wing Micro Air Vehicle during Forward Flight”, AIAA Scitech 2016, San Diego California, USA, Jan 5, 2016

189.Kwon, C.-B., Lee, D.-K., Yoon, J.-S., Han, J.-H., “Dynamic Stability Derivative Measurement of the MAV Model Using Magnetic Suspension Balance System”, APVC2015, Hanoi, Vietnam, Nov 25, 2015

188.Anh Tuan Nquyen, Han, J.-H., “Simulation and Analyses of Dynamic Gust Responses of a Flexible Aircraft Wing under Continuous Random Atmospheric Turbulence”, APVC2015,  Hanoi, Vietnam, Nov 25, 2015

187.Yun, J.-M., Kim, H.-Y., Han, J.-H., “Vision-based structural monitoring system for composite aircraft wing”, Advances in Mechanics of Composite Materials and Structures (Composites Seoul 2015), Seoul, Korea, Oct 23 2015

186.Yun, J.-M., Kim, H.-Y., Han, J.-H., Kim, H.-I., Kwon, H.-J., “Simulation Method for Performance Evaluation of Structural Deformation Measurements System Using Multiple Cameras”, 26th International Conference on Adaptive Structures and Technologies, Kobe, Japan, Oct 15, 2015

185.Park, G., Suh, J.-E., Han, J.-H., “Experimental evaluation of spacecraft RWA disturbance with flexible structural effects”, 44th Inter-Noise Congress & Exposition on Noise Control Engineering, San Francisco, USA, Aug 12, 2015

184.Han, J.-S., Chang, J.-W., Han, J.-H., “Experimental Study On The Forward Flight Of The Hawkmoth Using The Dynamically Scaled-Up Robotic Model”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, Korea, Jul 26, 2015

183.Han, J.-H., “Flight Dynamics Of Flapping-Wing Micro Air Vehicles: An Integrative Analysis Of Nonlinear Flight Dynamics And Unsteady Aerodynamics”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, Korea, Jul 26, 2015

182.Anh Tuan Nguyen, Han, J.-H., “Modified Unsteady Votex Lattice Method for Aerodynamics of Flapping Wing Models”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, orea, Jul 26, 2015

181.Yoon, J.-S., Park, G., Han, J.-H., “Effects of dimensional stability for space telescope composite structures”, 20th International Conference on Composite Materials , Copenhagen, Denmark, JUL 22, 2015

180. Lee, D.-O., Park, G.,Han, J.-H., “Hybrid isolation of reaction wheel disturbances using filtered-x least mean squares algorithm”, CANSMART 2015: International Conference on Smart Materials and Structures, Vancouver, Canada, Jul 16, 2015

179. Lee, J., Hwang, D.-H.,  Han, J.-H.,  Lee, Y.-J., ” NUMERICAL STUDY ON PYROSHOCK GENERATION AND PROPAGATION FROM PYROTECHNIC RELEASE DEVICES USING HYDROCODES”, 22th International Congress on Sound and Vibration, Florence, Italy, Jul 14, 2015

178. Choi, S.-Y., Kim, J.-K., Han, J.-S., Han, J.-H., “The effect of the abdomen deformation on the longitudinal stability of flying insects”, 2015 SPIE Smart structures/NDE conference, San Diego California, USA, Mar 10, 2015

177. Lee , D.-K., Han, J.-H., “Safety-guranteed Flight Test Environment for Micro Air Vehicles”, 2015 AIAA Science and Technology Forum and Exposition,Kissimmee, Florida, USA, Jan 05, 2015

176. Yoon, J.-S., Han, J.-H., “Parametric investigation on plasma streamwise vortex generators with flow around the bluff body”2015 AIAA Science and Technology Forum and Exposition,Kissimmee, Florida, USA, Jan 05, 2015

175. Kim, H.-Y., Lee, J.-S., Han, J.-H., “An indoor autonomous flight of multiple ornithopters following a circular path”, International Conference on Control, Automation and Systems, Gyeonggi-do, Korea, Oct 23, 2014

174. Park, G., Lee, D.-O., Han, J.-H., “Space qualification test of vibration isolator for low amplitude vibration”,International Astronautical Congress 2014, Toronto, Canada, Sep 29, 2014

173. Anh Tuan Nguyen., Han, J.-H., “Modified discrete vortex method to simulate the unsteady aerodynamics of two-dimensional insect-like flapping wing models in hover”,  Asia-Pacific International Symposium on Aerospace Technology 2014, Shanghai, China, Sep 25, 2014

172. Yun, J.-M., Kim, H.-I., Han. J.-H., Kwon H.-J., “Improvement of deformation measurement performance of the SPR camera system using SPR interactive modeling and simulation framework”, Asia-Pacific International Symposium on Aerospace Technology 2014, Shanghai, China, Sep. 24-26, 2014

171.  Yun, J.-M., Kim, H.-I., Han. J.-H., “Development and application of SPR interactive modeling and simulation framework for evaluating deformatioin measurement system”, Advances in Structural Health Management and Composite Structures 2014, Jeonju, South Korea, Aug. 27-29, 2014

170. Lee, J., Han. J.-H., Lee, Y., “Design of Low-Shock Ridge-Cut Explosive Bolts Based on Separation Behavior Analysis”, The 40th International Pyrotechnics Seminar,Colorado Springs, Colorado, USA, Jul. 13-18, 2014

169. Park, G., Lee, D.-O., Han, J.-H., “Space qualification test of vibration isolator using voice coil motor for space application”, International Conference on Computational & Experimental Engineering and Sciences, Changwon, South Korea, Jun. 12-17, 2014

168. Lee, D.-O., Park, G., Han, J.-H., “Development of vibration isolation platform for low amplitude vibration”, SPIE Smart Structures/NDE 2014, San Diego California, USA, Mar 9-13, 2014

167. Lee, J., Han, J.-H., Lee, Y., Lee, H.-J., “Separation Analysis of Ridge-Cut Explosive Bolts using Hydrocodes”, Asian Joint Conference on Propulsion and Power 2014, Jeju, Korea, Mar 5-8, 2014

166. HAN, J.-S., JANG, J.-W., Kim, J.-K., Han, J.-H., “Experimental Study on the Unsteady Aerodynamics of a Robotic Hawkmoth Manduca sexta model”, 2014 AIAA Science and Technology Forum and Exposition, National Harbor, USA, Jan 13-17, 2014

165. Lee, J.-S., Kim, J.-K., Han, J.-H., “Control of Wing Stroke Plane Angle for Stabilization of Hovering Flapping-wing Air Vehicle”, 2014 AIAA Science and Technology Forum and Exposition, National Harbor, USA, Jan 13-17, 2014

164. Lee, J.-S., Kim, H.-Y.,Han, J.-H., “Control of Tailed Flapping-wing Flying Robot”, 2013 10th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), Jeju, Korea, Oct 30-Nov 2,2013

163. Kang, C.-G., Lee, J.-S., Han, J.-H., “Bi-stable millimeter-scale displacement actuator for the drag brake and control canards of a projectile”, International Conference on Adaptive Structures and Technologies (ICAST 2013), Aruba, Oct 7-9, 2013

162. Jeong, H.-K., Lee, J., Han, J.-H., “Frequency Tunable Isolator Based on Shape Memory Alloy for Effective Shock and Vibration Suppression”, ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2013), UTAH, USA,  Sep. 16-18 , 2013.

161. Marshal Kafle, Lee, D.-O., Lee, J., Han J.-H., WOO,S-H., “Numerical modeling of shock generation and propagation during satellite separation” The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), Jeju, Korea, Sep 8-12, 2013

160. Kim, D.-H., Kim, S.-H., Park, J.-W., Han, J.-H., “Blade Deformation Measurement of a Model-Scale Rotor System Using a SPR system with IR cameras,” 39th European Rotorcraft Forum (ERF), Moscow, Russia, Sep. 3-6 , 2013.

159. Park, J.-W., Kang, L.-H., Han, J.-H., “Vibration Control using Shunted PUMPS”, 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (BAMN2013), Jeju, Korea, Aug. 26-30,2013

158. Kim, H.-I, Han, J.-H., “Real-time shape estimation of the flexible structures using stereo cameras and fiber optic sensors”, 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (BAMN2013), Jeju, Korea, Aug. 26-30,2013

157. Lee, J.-S., Kim, J.-K., Han, J.-H., “Wing kinematics optimization of hawkmoth Manduca sexta for hovering and translational flight modes”, 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (BAMN2013), Jeju, Korea, Aug. 26-30,2013

156. Lee, D.-O., Park, G., Han, J.-H., “Development of Micro-Vibration Isolator using Voice Coil Motor,”15th Asia Pacific Vibration Conference, ICC, Jeju, Korea, June. 2-6 , 2013.

155. Lee, J.-W., Han, J.-H., Shin, H.-K., Bang, H.-J., “Active Aeroelastic Control of Wind Turbine Blades using Trailing Edge Flap” 15th Asia Pacific Vibration Conference, ICC, Jeju, Korea, June. 2-6 , 2013.

154. Park, G., Lee, D.-O., Yoon, J.-S. , Han, J.-H. “Development of Testbed for Experimental Evaluation of Microvibration Effects on Pointing Stability of a Satellite”, 20th International Congress on Sound and Vibration (ICSV20), Bangkok, Thailand, July. 7-11, 2013.

153. Kafle, M.D., Lee, D.-O., Woo, S.-H., Han, J.-H.,  “Shock Response Estimation by Energy Flow Method and Virtual Mode Synthesis”, 20th International Congress on Sound and Vibration (ICSV20), Bangkok, Thailand, July. 7-11, 2013.

152. Lee, J., Han, J.-H., Lee, Y., Lee, H.,  “Separation Characteristics of Ridge-Cut Explosive Bolts with Confinement Condition”, International Conference on Computational & Experimental Engineering and Sciences (ICCES’13), Seattle, USA, May.24-28, 2013.

151. Han, J.-H., Lee, J.-W., Lee, J., “Experimental Flutter Suppression: Wind Tunnel Testing”, International Conference on Computational & Experimental Engineering and Sciences (ICCES’13), Seattle, USA, May.24-28, 2013.

150. Lee, D.-K., Han, J.-H., “Flight Controller Design of Flapping Wing MAV in a Magnetically Levitated Environment,” 2013 IEEE International Conference on Robotics and Automation, Karlsruhe, Germany, May 6-10, 2013.

149. Kim, J.-K., Han, J.-H., “An investigation of 6-DOF insect flight dynamics with a flexible multibody dynamics approach,” 2013 SPIE Smart Structures/NDE, San Diego, CA, USA, Mar.10-14, 2013.

148. Lee, D.-K., Han, J.-H., “Experimental Study on Passive Stability of Flapping Wing Physical Model under Magnetically Levitated Environment,” International Symposium on Nature Inspired Technology (ISNIT 2013), High 1 Resort, Kangwon, Korea, Jan.6-9, 2013.

147. Lee, J.-S., Kim, J.-K., Han, J.-H., “Wing kinematics optimization of insects using multi-objective evolutionary algorithm,” International Symposium on Nature Inspired Technology (ISNIT 2013), High 1 Resort, Kangwon, Korea, Jan.6-9, 2013.

146. Yoon, J.-S. and Han, J.-H., “Experimental study for plasma actuator performance enhancement through various electrode geometric shape,” AIAA Aerospace Science Meeting, TX, Jan.7-10, 2013.

145. Lee, D-O and Han, J.-H., “Development of Three Parameter Passive Vibration Isolator” Asia-Pacific International Symposium on Aerospace Technology 2012, Nov. 13-15, 2012

144. Bang, H. J., Kim, H. I., Shin, H. K., and Han, J. H., “Shape estimation and health monitoring of a composite wind turbine blade using distributed FBG sensors,” 15th European Conference on Composite Materials, Italy, Jun. 24-28, 2012 (Best Poster Award).

143. Jeong, H.-K., Lee, J., and Han, J.-H., “Frequency tune of isolator using SMA wire actuator,” The 23rd International Conference on Adaptive Structures and Technologies, Oct.11-13, 2012.

142. Kim, H.-Y., Lee ,J.-S., and Han, J.-H., “Indoor autonomous flight of ornithopter using motion capture system,” International Conference on Intelligent Unmanned Systems(ICIUS) 2012, Singapore, Oct.22-24, 2012.

141. Park, G., Lee, D.-O., Han, J.-H., Goo, N.-S., “Development of Multi-DOF Active Microvibration Emulator Using Smart Actuator ,” ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, USA, Sep.19-21, 2012.

140. Kang, L.-H., Han, J.-H.,“A Study on the Piezoelectric Actuation Perfomance under Mechanical Stress ,” Advances in Structural Health Management and Composite Structures 2012, Korea, Aug.29-31, 2012.

139. Kang, L.-H., Kim, H.-I., Han, J.-H.,“Operating Deflection Shape Monitoring of the Rotary Structure Using Fiber Optic Strain Sensor Array ,” Advances in Structural Health Management and Composite Structures 2012, Korea, Aug.29-31, 2012.

138. Park, J.-W., Han, J.-H.,Oh, H.-U., “Sensitivity Analysis of Shunted Piezoelectrics in Vibration Damping Performance under Temperature Variation,” International Congress on Sound and Vibration (ICSV19), Vilnius, Lithuania, Jul.8-12, 2012.

137. Lee, J.-W., Han, J.-H.,Shin, H.-K., “Active load control design for large wind turbine blades using trailing edge flap,” International Congress on Sound and Vibration (ICSV19), Vilnius, Lithuania, Jul.8-12, 2012.

136. Lee, J.-S., Han, J.-H.,“Indoor Flight Testing and Controller Design of Bioinspired Ornithopter ,” 12th International Conference on Intelligent Autonomous Systems, Korea, Jun.26-29, 2012. (Advances in intelligent systems and computing, Vol. 193, 2013, pp. 825-834)

135. Lee, D.-O., Yoon, J.-S., Han, J.-H.,“Integrated Framework for Jitter Analysis Combining ,” SPIE Smart Structures/NDE 2012, San Diego California, USA, Mar.12-15, 2012.

134. Kim, J.-K., Lee, J.-S., Kim, D.-K.,Han, J.-H.,“Anisotropic wing flexibility of bioinspired ornithopter enhances the aerocynamic performance and flight stability,” International Symposium on Nature Inspired(ISNIT 2012), High 1 Resort, Kangwon, Korea, Jan.9-11, 2012.

133. Lee, D.-K., Lee, J.-S.,Han, J.-H.,“Bioinspired method for identifying a micro air vehicle flight via magnetic suspension and balance system,” International Symposium on Nature Inspired(ISNIT 2012), High 1 Resort, Kangwon, Korea, Jan.9-11, 2012.

132. Lee, J.-S., Kim, J.-K.,Han, J.-H.,“Ornithopter trim flght characteristics including wing and tail aeroelasticity,” International Symposium on Nature Inspired(ISNIT 2012), High 1 Resort, Kangwon, Korea, Jan.9-11, 2012.

131. Lee, J.-S., Kim, J.-K.,Han, J.-H.,“Feedforward tail control and passive neck flexion isolation for line-of-sight stabilization of ornithopter flight,” International Symposium on Nature Inspired(ISNIT 2012), High 1 Resort, Kangwon, Korea, Jan.9-11, 2012.

130. Han, J.-H., Youn, S.-H., Jeong, H.-K., and Jang, Y.-S., “Enhanced Shock and Vibration Isolator for the Attenuation of Low-frequency Vibration and High-frequency Pyroshock Loads,” 3rd International Conference on Smart Materials and Nanotechnology in Engineering (SMN2011), Shenzhen, China, Dec.5-8, 2011.

129. Lee, D.-O., Yoon, J.-S., Han, J.-H.,“Integrated Modeling of Structure and Optical System for Jitter Analysis,” The 14th Asia Pacific Vibration Conference(APVC 2011), Hongkong, China, Dec.5-8, 2011.

128. Park, J.-W., Han, J.-H.,“Sensitivity Analysis of Shunted Piezoelectric for Structural Damping,” The 14th Asia Pacific Vibration Conference(APVC 2011), Hongkong, China, Dec.5-8, 2011.

127. Lee, D.-K., Lee, J.-S., Han, J.-H., Y. Kawamura., “Calibration of Magnetic Suspension and Balance System Through Dynamic Load Estimation,” The 14th Asia Pacific Vibration Conference(APVC 2011), Hongkong, China, Dec.5-8, 2011.

126. Lee, J.-S., Han, J.-H.,., Kim, D.-K., “Camber-Adjustable Flapping Wing Air Vehicles,” The 8th International Conference on Ubiquitous Robots and Ambient Intelligence(URAI2011), Incheon, Korea, Nov.24, 2011.

125. Lee, D.-K., Lee, J.-S., Han, J.-H.,., Y. Kawamura., “Status of MSBS Study at KAIST,” The 21st International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2011), Daejeon, Korea, Oct.12, 2011.

124. Kim, J.-K., Lee, J.-S., Han, J.-H.,., “An Efficient Strategy to Enhance Longitudinal Flight Stability of Ornithopters,” ISGMA 2011(International Syposium on Green Manufacturing and Applications), Seoul, Korea, Oct.6-7, 2011.

123. Lee, J.-W., Kim, J.-K.,Han, J.-H.,., Shin, H.-K., “Active Load Control for Wind Turbine Blades using Trailing Edge Flap,” The 2011 World Congress on Adavances in Structural Engineering and Mechanics(ASEM’11+), Seoul, Korea, Sep.21, 2011.

122. Bang, H.-J., Kim, H.-I., Jang, M.-S., Han, J.-H.,., “Tower Deflection Monitoring of a Wind Turbine using an Array of Fiber Bragg Grating Sensors,” ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), Arizona, USA, Sep.18-21, 2011.

121. Kim, H.-I., Han, J.-H.,., Bang, H.-J., Kim, S.-H., Lee, B.-W., “Simultaneous Measurement of Deformation and Fracture of Composite Structures using Fiber Bragg Grating Sensors,” ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), Arizona, USA, Sep.18-21, 2011.

120. Yoon, J.-S., Kim, H.-I., Han, J.-H.,., “Experimental Study on the Effect of Transverse Strain on the Measurement of the Thermal Expansion of Composite using FBG Sensors,” ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), Arizona, USA, Sep.18-21, 2011.

119. Lee, J.-S, Lee, D.-K. Lee, J., Han, J.-H.,., “Limit-Cycle Oscillation Suppression of Bioinspired Ornithopter: Wind Tunnel Testing,” ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), Arizona, USA, Sep.18-21, 2011.

118. Han, J.-H.,., Lee, D.-K., Lee, J.-S, Chung, S.-J., “Teaching a Micro Air Vehicle How To Fly as We Teach Bables How To Walk,” ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), Arizona, USA, Sep.18-21, 2011.

117. Yoon, J.-S.,Kim, H.-I.,Han, J.-H.,, Yang, H-S., “Micro Deformation Measurement System Construction For Highly Dimensional Stable Composite due to Out-gassing in Space,” The 18th International conference on Composite Materials(ICCM18), Jeju, Korea, April 21-26, 2011.

116. Kim, J.-K., Lee, J.-S., Han, J.-H.,., “Limit-Cycle Oscillation Suppression of Ornithopter Longitudinal Flight Dynamics,” AIAA Guidance, Navigation, and Control Conference, Portland, Oregon, USA, Aug. 9, 2011.

115. Lee, D.-K., Lee, J.-S., Han, J.-H.,.,Y. Kawamura, “System Identification and Controller Design of a Micro Air Vehicle using Magnetic Suspension and Balance System,” AIAA Guidance, Navigation, and Control Conference, Portland, Oregon, USA, Aug. 9, 2011.

114. Park, J.-W., Kim, H.-I.,Han, J.-H.,, Kim, D.-H., and Song, K.-W., “Measurement of Rotor Blade Motion using SPR Method,” 3rd Asia Pacific International Symposium on Aerospace Technology, Melbourne, Australia, Feb. 28-Mar. 3, 2011.

113. Kim, H.-I. and Han, J.-H.,, ”Shape Estimation Approach for the General Structure Based On The Strain Data,” 3rd Asia Pacific International Symposium on Aerospace Technology, Melbourne, Australia, Feb. 28-Mar. 3, 2011.

112. Kang, L.-H., Han, J.-H., “Piezoelectric Unimorph with Mechanically Pre-stressed Substrate,” 2010 International Symposium on Nature-Inspired Technology (ISNIT), Seoul, Korea, Oct. 15, 2010.

111. Lee, J.-S., Lee, D.-K., Kim, J.-K., Han, J.-H., and Chung, S.-J., “Development of Smart Tail-wing using Macro-fiber Composite Actuator for Pitch-axis Stability Augmentation of Bio-inspired Ornithopter,” ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Philadelphia, PA, USA, Sep. 28- Oct. 1, 2010 (Presentation only).

110. Yoon, J.-S., Kim, H.-I., Han, J.-H.,., Kim, H.-B., “Development of a Precise Measurement System for the Dimensional Change of the High Stable Telescope Structure in Space Environment,” 61st International Aeronautical Conference, Prague, Czech, Sep 30, 2010.

109. Kim, H.-I., Yoon, J.-S., Han, J.-H., “Effects of Transverse Strains on the Measurement of the Thermal Expansion of the Composite Using FBG Sensors,” The ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(SMASIS), Philadelphia, Pennsylvania, USA, Sep. 28-Oct. 1, 2010.

108. Kang, L.-H., Han, J.-H., “Performance Evaluation of the pre-stressed Piezoelectric Unimorph Using Nonlinear Piezoelectric Properties,” The ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(SMASIS), Philadelphia, Pennsylvania, USA, Sep. 28-Oct. 1, 2010.

107. Lee, D.-O., Kang, L.-H., Han, J.-H., “Active Vibration Islation System Using Piezolectric Unimorph with Mechanically Pre-stressed Substrate,” The ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(SMASIS), Philadelphia, Pennsylvania, USA, Sep. 28-Oct. 1, 2010.

106. Kim, J.-K., Lee, J.-S., Han, J.-H., “Ornithopter Flight Simulation: Trim Condition Search,” 8th International Symposium on Intelligent Automation and Control, Kobe, Japan, Sep.18-22, 2010.

105. Lee, J.-S., Lee, D.-K., Han, J.-H., “Ornithopter Attitude Estimation: Ground Test,” 8th International Symposium on Intelligent Automation and Control, Kobe, Japan, Sep.22, 2010.

104. Lee, D.-K., Lee, J.-S., Han, J.-H.,“System Modeling of a Small Flight Vehicle Using Magnetic Suspension and Balance System, “8th International Symposium oIntelligent Automation and Control, Kobe, Japan, Sep.22, 2010.

103. Kang, L.-H., Kim, H.-I., Lee, J., Park, J.-W., Han, J.-H., “Vibration Control of the Composite Wing Model Using Piezoelectric Actuators,” The 3rd International Conference on Multi-Functional Materials and Structures, Jeonju, Korea, Sep.14-18,2010.[DOI]

102. Han, J.-H., Kim, H.-I., Park, J.-W., “Measurement of the Rotor Blade Deformation Using Stereo Cameras and Distributed Fiber Bragg Grating Sensors,” ICAAT 2010 International Conference on Advanced Aircraft Technologies, Jinju, Korea, Aug. 30- Sep. 1, 2010.

101. Lee, J.-S., Han, J.-H.,” “Flapping Wing Air Vehicles at KAIST,” UKC 2010 Symposium on Aerospace, Automotive, Mechanics(AAM), seattle, USA, Aug. 13, 2010.

100. Lee, J.-S., Kim, J.-K., Kim, D.-K., and Han, J.-H.,“Longitudinal Flight Dynamics of Bio-inspired Ornithopter Considering Fluid-Structure Interaction,” AIAA Atmospheric Flight Mechanics Conference, Toronto, Ontario, Canada, Aug. 2-5, 2010.

99. Kim, H.-I., Kang, L.-H., Han, J.-H., and Bang, H.-J., “Real-time Shape Estimation with Fiber Optic Sensors Distributed in Rotor Blades,” European Wind Energy Coference & Exhibition, Warsaw, Poland, Apr. 20-23, 2010.

98. Lee, D.-O., Han, J.-H., Woo, S.-H., and Kim, J.-H., “Shock response prediction of low altitude earth observation satellite during launch vehicle separation using an empirical model,” Asia-Pacific International Symposium on Aerospace Technology(APISAT), Gifu, Japan, Nov. 4-6, 2009.

97. Lee, D.-H., Kim, H.-I., Yoon, J.-S., and Han, J.-H., “Precision measurement of the dimensional change of the composite materials in space applications,” Asia-Pacific International Symposium on Aerospace Technology(APISAT), Gifu, Japan, Nov. 4-6, 2009.

96. Kim, H.-I., Kim, H.-Y., Park, H.-J., Kim, J.-B., Kim, D.-Y., and Han, J.-H., “Development of a real-time point tracker system for MAV wind tunnel tests using commercial video cameras,” 2nd International Forum on Rotorcraft Multidisciplinary Technology, Seoul, Korea, Oct. 19-20, 2009.

95. Yoon, S.-H., Han, J.-H., Jang, Y.-S., Yi, Y.-M., and Cho, G.-R., “Pyroshock and vibration attenuation tests using compressed mesh washer isolators with the application of pseudoelastic SMA wire,” International Astronautical Congress, Daejeon, Korea, Oct. 12-16, 2009.

94. Lee, D.-H., Kim, H.-I., Yoon, J.-S., and Han, J.-H., “Experimental study on the effects of the thermal expansion for composite space structures,” Korea-Japan joint symposium on composite materials, Nonoichi, Ishikawa, Japan, Sep. 25, 2009.

93. Kang, L.-H., Lee, J.-W., Han, J.-H., Chung, S.-J., and Ko, H.-Y., “Prediction of actuation displacement and force of a pre-stressed piezoelectric unimorph, PUMPS considering internal stress effects,” ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Oxnard, CA, USA, Sep. 21-23, 2009.[DOI]

92. Kim, H.-I., Kang, L.-H., and Han, J.-H., “Real-time structure shape estimation using distributed fiber bragg grating sensors,” ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Oxnard, CA, USA, Sep. 21-23, 2009.[DOI]

91. Kim, D.-K., Lee, J.-S., and Han, J.-H., “A numerical study on the sweep angle effect of flapping-wing flight using fluid-structure interaction analysis,” Proc. SPIE, Vol.7493, 2nd International conference of smart materials and nanotechnology in engineering (SMN), Weihai, China, Jul. 8-11, 2009. http://dx.doi.org/10.1117/12.824848

90. Han, J.-H., Lee, J.-S., and Kim, D.-K., “Toward a bio-inspired flapping UAV: Efficient flui-structure interaction,” 2nd International conference of smart materials and nanotechnology in engineering (SMN), Weihai, China, Jul. 8-11, 2009.

89. Han, J.-H., Lee, J.-W., and Kang, L.-H., “Design and construction of pre-stressed piezoelectric unimorph for trailing edge flap actuation,” Proc. SPIE, Vol.7493, 2nd International conference of smart materials and nanotechnology in engineering (SMN), Weihai, China, Jul. 8-11, 2009. http://dx.doi.org/10.1117/12.825055

88. Peiffer, A. T., Lee, J.-S., Han, J.-H., and Baier, H., “Ornithopter flight simulation considering flexible multi-body dynamics,” Proc. International Symposium on Nature-Inspired Technology (ISNIT), Jeju Island, Korea, Jun. 17-18, 2009.

87. Han, J.-H., Kang, L.-H., and Youn, S.-H., “Smart Material Systems for Vibration Monitoring and Suppression,” Proc. Noise and vibration: Emerging Methods (NOVEM), Oxford, UK, Apr. 5-8, 2009.

86. Han, J.-H., Lee, J.-S., and Kim, D.-K., “Bio-inspired Flapping UAV Design: A University Perspective,” Proc. SPIE, Vol.7295, 72951I, (Keynote Paper), 16th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 8-12, 2009. http://dx.doi.org/10.1117/12.815337

85. Kundu, C. K., and Han, J.-H., “Nonlinear Piezo-Hygro-Thermo-Elastic Behavior of Piezolaminated Composite Shells using Finite Element Method,” 2008 KSAS-JSASS Joint Symposium, Ramada Hotel, Jeju, Korea, Nov. 20, 2008

84. Kim, H.-I., Han, J.-H., Yang, H., Cho, C., Cho, H., and Kim, H.-B., “High-precision CTE Measurement System for the Structural Materials in Space Applications,” 2008 KSAS-JSASS Joint Symposium, Ramada Hotel, Jeju, Korea, Nov. 20, 2008

83. Kim, H.-I., Kang, L.-H., and Han, J.-H., “Measurement of the Thermal Expansion for Space Structures Using Fiber Bragg Grating Sensors and Displacement Measuring,” ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Turf Valley Resort, Ellicott City, MD, Oct. 30, 2008.

82. Kang, L.-H., Lee, J.-W., Han, J.-H., Chung, S.-J., and Ko, H.-Y., “A New Fabrication Method for a Curved Shape Piezoelectric Unimorph Actuator,” ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Turf Valley Resort, Ellicott City, MD, Oct. 30, 2008.[DOI]

81. Han, J.-H., Lee, J.-Y., and Kim, D.-K., “Ornithopter Modeling for Flight Simulation,” ICCAS 2008, Seoul, Korea, Oct. 14-17, 2008. http://dx.doi.org/10.1109/ICCAS.2008.4694517

80. Kim, D.-K., and Han, J.-H., “Optimal Design of a Flexible Flapping Wing Using Fluid-Structure Interaction Analysis,” The 8th International Conference on Motion and Vibration Control (MOVIC), TUM, Munich, Germany, Sep. 15-18, 2008.

79. Han, J.-H., Kim, H.-I., and Kang, L.-H., “Optical Fiber Sensor Technology for The Measurement of Structural Dynamic Shapes,” International Joint Conference of SMSAE/SMEBA 2008, Nanjing, China, July 23, 2008.

78. Kim, D.-K., and Han, J.-H., “Vibration Characteristics of Pre and Post Buckled Laminated Composite Spherical Shells,” 15th International Congress on Sound Vibration (ICSV), Daejeon, Korea, July 6-10, 2008.

77. Kundu, C. K., and Han, J.-H., “A Dynamic Model of a Flexible Flapping Wing for Fluid-Structure Interaction Analysis,” 15th International Congress on Sound Vibration (ICSV), Daejeon, Korea, July 6-10, 2008.

76. Han, J.-H., Kang, L.-H., and Lee, J.-W., “An Active Vibration Isolation System Using Piezoelectric Unimorph Actuators,” International Conference and Exhibition On New Actuators and Drive Systems, Bremen, Germany, June 9-11, 2008.

75. Han, J.-H., and Kang, L.-H., “Dynamic Deformation Reconstruction of Aerospace Structures Using Fiber Bragg Granting Sensors,” The International Symposium on Advanced Technology for High Performance Aircraft Core Parts Design, Gyeongsang National University, Jinju, Korea, May 29-30, 2008.

74. Han, J.-H., Lee, J.-S., and Kim, D.-K., “Bio-inspired Design of Ornithopter,” US-KOREA Workshop and International Student Forum on Bio-Inspired Sensor Technology and Infra-Structure Monitoring, Seogwipo KAL Hotel, Jeju, Korea, May 23-25, 2008.

73. Treiber, J., Mueller, U. C., Han, J.-H., and Baier, H. J., “Filtering techniques in the dynamic deformation estimation using multiple strains measured by FBGs,” Proc. SPIE Vol. 6932, pp.69322A1-69322A9, 15th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 9-13, 2008. http://dx.doi.org/10.1117/12.776176

72. Park, K.-Y., Han, J.-H., Lee, S.-B., Kim, J.-B., Yi, J.-W. and Lee, S.-K., “Fabrication and electromagnetic characteristics of microwave absorbers containing carbon nanofibers and magnetic metals,” Proc. SPIE Vol. 6929, pp.69292G1-69292G10, 15th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 9-13, 2008. http://dx.doi.org/10.1117/12.776142

71. Kim, D.-K., Lee, J.-S., Lee, J.-Y. and Han, J.-H., “An aeroelastic analysis of a flexible flapping wing using modified strip theory,” Proc. SPIE Vol.6928, pp.69281O1-69281O8, 15th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 9-13, 2008. http://dx.doi.org/10.1117/12.776137

70. Lee, J.-Y., Kim, D.-K., Lee, J.-S. and Han, J.-H., “Numerical analyses of stabilization and control for flapping-wing flight,” Proc. SPIE Vol.6928, pp.69281P1-69281P8, 15th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 9-13, 2008. http://dx.doi.org/10.1117/12.776162

69. Lee, J.-S., Kim, D.-K., Lee, J.-Y. and Han, J.-H., “Experimental evaluation of a flapping-wing aerodynamic model for MAV application,” Proc. SPIE Vol. 6928, pp.69282M1-69282M8, 15th SPIE International Symposium Smart Structures/NDE, San Diego, CA, USA, Mar. 9-13, 2008. http://dx.doi.org/10.1117/12.776169

68. Han, J.-H., Kang, L.-H., Rapp, S., Muller, U. C. and Baier, H., “Deformation Shape Estimation of Beam and Plate Structures Using Fiber Bragg Grating Strain Sensors,” Proceedings of the 6th Korea-Japan Joint Symposium on Composite Materials, Pohang, Korea, Nov. 1, 2007.

67. Kim, D.-K., Lee, J.-Y., Lee, J.-S., and Han, J.-H., “An Aerodynamic Model of Flapping-wing Aircraft Using Modified Strip Theory,” 2007 JSASS-KSAS Joint International Symposium, Kitakyushu, Japan, Oct. 10-12, 2007.

66. Park, K.Y., Lee, S.-B., Kim, J.B., Yi, J.-W., Lee, S.-K., and Han, J.-H., “Fabrication and Electromagnetic Characteristics of Composites Containing Electroless Metal-Coated Carbon Nanofibers,” 16th International Conference on Composite Materials, ICC Kyoto, Japan, July 8-13, 2007.

65. Han, J. H., Kim, D. K., and Kwon, K. J., “Wind Tunnel Tests for a Flapping Wing Model with Changeable Camber Using Macro-Fber Composite Actuators (Invited Paper),” International Conference on Smart Materials and Nanotechnology in Engineering, Harbin, China, July 1-4, 2007.

64. Kim, D.-K., Han, J.-H., and Kwon, K.-J., ”Experimental Investigation on a Bio-mimetic Flapping Wing with Macro-Fiber Composites (Keynote Paper),” World Forum on Smart Materials and Smart Structures Technology, Chongqing & Nanjing, China, May 22-27, 2007.

63. Oh, S.-H., Roh, J.-H., Lee, I., and Han, J.-H., “Suppression of the Snap-Through Behaviors of Composite Shell Structures Using Piezoelectric Actuator,” World Forum on Smart Materials and Smart Structures Technology, Chongqing & Nanjing, China, May 22-27, 2007.

62. Roh, J.H., Yoo, E.J., Han, J.-H., and Lee, I., “Large Deformation Analysis of Inflated Membrane Boom Structures with Various Slenderness Ratios,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and material Conference, Honolulu, Hawaii, USA, Apr. 2007.

61. Kim, H.I., Kim, D.-K., and Han, J.-H., “Study of Flapping Actuator Modules Using IPMC,” 14th SPIE International Symposium Smart Structures and Materials, San Diego, CA, USA, Mar. 18-22, 2007. http://dx.doi.org/10.1117/12.715633

60. Rapp, S., Kang, L.-H., Mueller, U., Han, J.-H., and Baier, H., “Dynamic Shape Estimation by Modal Approach Using Fiber Bragg Grating Strain Sensors,” 14th SPIE International Symposium Smart Structures and Materials, San Diego, CA, USA, Mar. 18-22, 2007. http://dx.doi.org/10.1117/12.715634

59. Kim, D.-K., Kim, H.-I., and Han, J.-H., “Experimental Study on the Aerodynamic Characteristics of a Biomimetic Flapping Wing,” 3rd International Conference on Flow Dynamics, Matsushima, Japan, 7-9, Nov., 2006.

58. Han, J.-H., “Structural Vibration Control Using Piezoelectric Actuation,” 3rd International Conference on Flow Dynamics, Matsushima, Japan, 7-9, Nov., 2006.

57. Lee, I., Roh, J.-H., Kim, D.-K., and Han, J.-H., “Dynamic Behaivor and Configuration Control of Composite and Aerospace,” The 5th Asian-Australasian Conference on Composite Materials (ACCM-5), HongKong, 27-30, Nov. 2006.

56. Han, J.-H., Kang, L.-H., and Lee, I., “Fiber Bragg Grating Sensor Technologies for the Measurement of Dynamic Structural Responses,” 2nd International Conference on Smart Materials and Structures in Aerospace Engineering, Nanjing, China, 24-26, Sep. 2006.

55. Yoo, E.J., Roh, J.-H., and Han, J.-H., “Prevention of Wrinkling Development in the Inflatable Boom Structure,” 2006 KSAS-JSASS Joint International Symposium on Aerospace Engineering, Busan, Korea, 15-17, Nov., 2006.

54. Kim, D.-K., Kim, H.-I., Han, J.-H., and Kwon, K.-J., “Experimental Investigation on the Aerodynamic Characteristics of a Bio-mimetic Flapping Wing with Macro-Fiber Composites,” International Joint Conference of INABIO/SMEBA 2006, Daejeon, Korea, 21-23, Sep. 2006.

53. Han, J.-H., Roh, J.-H., Yoo, E.-J., and Lee, I., “Adaptive Inflatable Structures with Shape Memory Alloy Actuators,” 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.

52. Lee, S.-J., Kwon, H.-J., Lee, I., Han, J.-H., “Flutter Suppression of the Two-dimensional Wing with Control Surface and External Store in Transonic Region,” The 8th International Conference on Motion and Vibration Control (MOVIC 2006), Daejeon, Korea, 27-30 Aug., 2006.

51. Kang, L.-H., Kim, D.-K., and Han, J.-H., “Estimation of Structural Deformation Using FBG Sensor Array,” The 8th International Conference on Motion and Vibration Control (MOVIC 2006), Daejeon, Korea, 27-30 Aug., 2006.

50. Kim, D.-K., Lee, M.-S., and Han, J.-H., “Dynamic Characteristics of Pantograph Tilting Structure with Sliding Mode,” The 8th International Conference on Motion and Vibration Control (MOVIC 2006), Daejeon, Korea, 27-30 Aug., 2006.

49. Kim, D.-K., and Han, J.-H., “Vibrations of Nonlinear Structures Using Structural Coupling method,” The Thirteenth International Congress on Sound and Vibration,” Vienna, Austria, 2-6 June, 2006.

48. Roh, J. H., Han, J.-H., and Lee, I., “Thermomechanical Behaviors of Ni-Ti Shape Memory Alloy Ribbons and Their Numerical Modeling,” International Conference on technology Fusion, Seoul, Korea, 17-19 May, 2006.

47. Han, J.-H., Yoo, E.-J., and Roh, J.-H., “Wrinkling Control of Inflatable Booms Using Smart Material Patch,” 13th SPIE International Symposium Smart Structures and Materials, San Diego, CA, USA, Feb. 26-Mar. 2, 2006. http://dx.doi.org/10.1117/12.658126

46. Kim, D.-K., and Han, J.-H., “Smart Flapping Wing Using Macrofiber Composites,” 13th SPIE International Symposium Smart Structures and Materials, San Diego, CA, USA, Feb. 26-Mar. 2, 2006. http://dx.doi.org/10.1117/12.658117

45. Roh, J. H., Han, J.-H., and Lee, I., “Numerical Modeling of Shape Memory Alloy Thin Film Actuators and Their Applications,” 1st International Conference on Advanced Nondestructive Evaluation, ICC Jeju, KOREA, Nov. 7-9, 2005.

44. Lee, I., Roh, J.-H., Yoo, E.-J., Han, J.-H., and Yang, S.-M., “Configuration Control of Aerospace Structures with Smart Materials,” International Joint Conference of JFSIMS (Japan-France Joint Seminar on Intelligent Materials) and SMEBA (International Symposium on Smart Materials for Engineering and Biomedical Application), Tokyo & Hakone, Japan, Oct. 29-31, 2005.

43. Roh, J.-H., Lee, I., and Han, J.-H., “Thermal Post-buckling Analysis of Adaptive Composite Shell Structures with SMAs,” The 5th Korea-Japan Joint Symposium on Composite Materials, Matsuyama, Japan, Oct. 19-21, 2005.

42. Park, K.-Y., and Han, J.-H., “Radar Absorbing Structures using Composite Materials and Conductive Fillers,” The 5th Korea-Japan Joint Symposium on Composite Materials, Matsuyama, Japan, Oct. 19-21, 2005.

41. Shen, X., Wang, X., Han, J.-H., and Lee, I., “Composite PZT Actuator and Its Integration with SMA,” 2nd ANCRiSST Workshop on Advanced Smart Materials and Smart Structures Technology, Kyungju, Korea, Jul 2005.

40. Lee, I., Roh, J. H., Yang, S. M., and Han, J.-H., “Thermomechanical Behavior of Shape Adaptive Structures with SMA Actuator”, 6th International Congress on Thermal Stress, Vienna University of Technology, Vienna, AUSTRIA, May 26-29, 2005.

39. Yang, S.-M., Oh, S.-H., Han, J.-H., and Lee, I., “Experimental Study on Aeroelastic Characteristics of a Morphing Wing with SMA Actuators and FBG Sensor,” International Conference on Emerging System Technology (Actuators/Sensors & Micro Air Robots), Seoul, Korea, May 2005.

38. Kim, D.-K., and Han, J.-H., “Establishment of Gun Blast Wave Model and Structural Analysis for Blast Load,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and material Conference, Austin, TX, USA, Apr. 2005.

37. Roh, J.-H., Han, J.-H., and Lee, I., “Finite Element Analysis of Adpative Inflatable Structures with SMA Strip Actuator,” 12th SPIE International Symposium Smart Structures and Materials, San Diego, CA, USA, Mar. 2005. http://dx.doi.org/10.1117/12.599457

36. Kim, K.S., Kim, J.-Y., Kwon, H.-J., Lee, I., and Han, J.-H., “Transonic Aeroelastic Analysis of Vertical and Horizontal Tail Wings using Multi-Block Method,” KSAS-JSASS Joint Symposium on Aerospace Engineering, Seoul, Korea, Nov. 2004.

35. Shin, W.-H., Lee, I., Han, J.-H., Bae, J.S., Shin, Y.S., and Lee, Y.W., “Supersonic Nonlinear Flutter Analysis of Missile Fin Considering Dynamic Stiffness of Actuator,” KSAS-JSASS Joint Symposium on Aerospace Engineering, Seoul, Korea, Nov. 2004.

34. Kim, J.-Y., Kwon, H.-J., Kim, K.-S., Lee, I., and Han, J.-H., “Numerical Investigation on the Aeroelastic Instability of Complete Aircraft” 4th International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, Sendai, Japan, Nov. 2004.

33. Lim, I.-G., Lee, I., and Han, J.-H., “Aeroelastic Analysis of Bearingless Rotors with Composite Flexbeam using a Large Deflection Beam Theory,” 4th International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, Sendai, Japan, Nov. 2004.

32. Yoo, J.-H., Park, Y.-K., Lee, I., and Han, J.-H., “Aeroelastic Analysis of a Wing with Freeplay in the Subsonic/Transonic Regions,” 4th International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, Sendai, Japan, Nov. 2004.

31. Han, J.-H., Kang, L.-H., Chang, Y.-H., and Kim, D.-H., “Active Vibration Control Using Self-sensing Actuator,” 4th International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, Sendai, Japan, Nov. 2004.

30. Lee, I., Roh, J.-H., Yang, S.-M., and Han, J.-H., “Shape and Vibration Control of Smart Composite Structures,” 29th Symposium on Composite Materials, JSCM, Okinawa, Oct. 2004.

29. Han, J.-H., Roh, J.-H., and Lee, I., “Nonlinear Finite Element Simulation of SMA Strip Actuator and Their Applications,” The US-Korea Joint Seminar/Workshop on Smart Structures technologies, Seoul, Korea, Sep. 2004.

28. Han, J.-H., Chang, Y.-H., Kim, D.-H., and Lee, I., “Patch-type Self-sensing Actuator Using PZT and EFPI for Vibration Control,” 9th International Conference on New Actuators,” Bremen, Germany, Jun. 2004.

27. Yang, S.-M., Roh, J.-H., Han, J.-H., and Lee, I., “Numerical and Experimental Studies on Shape Control of Composite Plates Using SMA Actuators,” International Symposium on Smart Materials for Engineering and Biomedical Applications, Suzhou, Jiangsu, China, May 2004.

26. Kim, D.-K., Roh, J.-H., Kim, K.-S., Lee, I., and Han, J.-H., “Structural Modification of a Plate Exposed to Muzzle Blast Waves Using SMA and PZT,” International Workshop on Advanced Smart Materials and Smart Structures Technology, Hawaii, USA, Jan. 2004.

25. Chang, Y.-H., Kim, D.-H., Lee, I., and Han, J.-H., “On-line Phase Tracking of EFPI Sensor and Fuzzy Logic
Vibration Control,” International Workshop on Advanced Smart Materials and Smart Structures Technology, Hawaii, USA, Jan. 2004.

24. Lee, I., Kim, D.-H., and Han, J.-H., “Vibration Measurement Using Optical Fiber Sensors,” 8th Japan International SAMPE Symposium and Exhibition, Tokyo, Japan, Nov., 2003.

23. Lee, I., Kim, D.-H., Roh, J.-H., and Han, J.-H., “Application of Smart Materials to Composite Structures,” 11th Asia-Pacific Conference on Non-Destructive Testing, Seogwipo, Korea, Nov. 2003. (Keynote paper)

22. Roh, J.-H., Han, J.-H., and Lee, I., “Effects of Shape Memory Alloys on Structural Modification,” 11th Asia-Pacific Conference on Non-Destructive Testing, Seogwipo, Korea, Nov. 2003.

21. Roh, J.-H., Yang, S.-M., Han, J.-H., and Lee, I., “Adaptive Thermal Post-buckling Responses of Shape Memory Hybrid Composite Shell Panel,” 14th International Conference on Adaptive Structures and Technologies (ICAST ’2003), Seoul , Korea, Oct. 2003.

20. Choi, J.-H., Han, J.-H., and Lee, I., “Thermoelastic Phenomena of Composite Multi-Disk Clutches in Frictional Contact,” 4th Korea-Japan Joint Symposium on Composite Materials, KAIST, Oct., 2003.

19. Roh, J.-H., Yang, S.-M., Han, J.-H., and Lee, I., “Thermal Post-Buckling Analysis of Shape Memory Alloy Hybrid Composite Shell Panel,” 4th Korea-Japan Joint Symposium on Composite Materials, KAIST, Oct., 2003.

18. Kim, D.-K., Bae, J.-S., Han, J.-H., and Lee, I., “Nonlinear Dynamic Model Establishment of Deployable Missile Control Fin,” 32th International Congress and Exposition on Noise Control Engineering, Seogwipo, Korea, Aug. 2003.

17. Kim, D.-H., Chang, Y.-H., Han, J.-H., and Lee, I., “Active Control of Flow-Induced Vibration Using Piezoelectric Actuation and Neural-Networks,” 32th International Congress and Exposition on Noise Control Engineering, Seogwipo, Korea, Aug. 2003.

16. Kim, D.-H., Park, K.-Y., Han, J.-H., and Lee, I., “Flutter Suppression of Composite Plates Using Optical Fiber Sensors and Piezoelectric Actuators,” 14th International Conference on Composite Materials, San Diego, CA, USA, Jul. 2003.

15. Choi, J.-H., Lee, I., and Han, J.-H., “Numerical Simulation for Thermoelastic Contact Problem of Disk Brakes,” 5th International Congress on Thermal Stresses and Related Topics, Blacksburg, VA, USA, Jun. 2003.

14. Yun, S.-H., Lee, J.-H., Kim, Y.-C., Han, J.-H., Park, J.-H., and Lee, S.-P., “Ku/Ka band Feed Assembly for the CBS Antenna Subsystem,” The 3rd ETRI-CRL Joint Conference, Daejeon, Korea, Nov. 2002.

13. Lee, I., Yang, S.-M., Han, J.-H., and Youn, S.-H., “Adaptive Vibration Control of Composite Beams Using Neural Network Controller,” 7th Japan International SAMPE Symposium & Exhibition, Tokyo, Japan, Nov. 2001.

12. Han, J.-H., Park, J.-H., Tani, J., Qiu, J., and Lee, I., “Experimental Flutter Control of a Cantilevered Plate Using Piezoelectric Actuation and Modern Control Theory,” 11th International Conference on Adaptive Structures and Technologies (ICAST ’2000), Nagoya, Japan, Oct. 2000.

11. Rew, K.-H., Han, J.-H., and Lee, I., “On-line Frequency Estimation and Adaptive Vibration Control of Composite Structures with Delaminations,” The Fourth International Conference on Fracture & Strength of Solids, Pohang, Aug. 2000.

10. Oh, I.K., Han, J.-H., and Lee, I., “Thermopiezoelastic Postbuckling and Vibration Analysis of Piezolaminated Plate Using Layerwise Theory,” The Second Asian-Australasian Conference on Composite Materials, Kyungju, Korea, Aug. 2000.

9. Han, J.-H., Tani, J., and Lee, I., “Flutter Suppression of a Lifting Surface Using Piezoelectric Actuation,” The Second Asian-Australasian Conference on Composite Materials, Kyungju, Korea, Aug. 2000.

8. Rew, K.H., Han, J.-H., and Lee, I., “Adaptive Multi-Modal Vibration Control of Wing-like Composite Structure Using Adaptive Positive Position Feedback,” The 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia, April 2000.

7. Han, J.-H., Tani, J., Qiu, J., Kohama, Y., and Shindo, Y., “A New Wall Motion Actuator Using Magnetic Fluid and Elastic Membrane for the Laminar Flow Control,” 10th International Conference on Adaptive Structures and Technologies (ICAST ’99), Paris, France, Oct. 1999.

6. Han, J.-H., Lee, I., and Tani, J., “Optimal Placement of Piezoelectric Sensors and Actuators in Vibration Controlled Composite Structures Using Genetic Algorithms,” The First Asian-Australasian Conference on Composite Materials, Osaka, Japan, Oct. 1998.

5. Han, J.-H., Youn, S.-H., and Lee, I., “Analytical and Experimental Study of Piezoelectric Actuation for Vibration Control,” Asia-Pacific Vibration Conference, Kyongju, Korea, Nov. 1997.

4. Lee, I., and Han, J.-H., “Refined Analysis of Composite Plates with Distributed Piezoelectric Actuators for Vibration Control,” 5th International SAMPE Symposium & Exhibition, Tokyo, Japan, Oct. 1997.

3. Han, J.-H., and Lee, I., “Active Vibration Control of Composite Structures with Piezo-ceramic Actuator and Piezo-film Sensor,” 3rd International Symposium on Textile Composite in Building Construction, Seoul, Korea, Nov. 1996.

2. Lee, I., and Han, J.-H., “Sensing/Actuating Characteristics of Piezo Laminated Composite Plates Using Layer-wise Theory,” 3rd International Conference on Composite Engineering, New Orleans, Lousiana, U.S.A., July 1996.

1. Lee, I., and Han, J.-H., “Optimal Placement of Piezoelectric Actuators in Intelligent Structures Using Generic Algorithms,” 3rd International Conference on Intelligent Materials, Lyon, France, June 1996.